Receive help on your LG product
Receive help on your LG product
Check out the latest information related to this product.
For the most accurate technical information regarding features, specifications, installation and operation of your LG product, please refer to the Owner's Manual and other documents available for this product.
Software upgrades include device drivers and firmware updates only for specific models. Check your owner's manual to determine if your product supports software upgrades.
※ New firmware (ver. SE02) for only GSA-E40L(External 18X Super multi DVD Writer)
◆ Improvement Point
Improve writing quality for recordable media
Refer to the attached file
GSA-E40L Version SE02 Firmware Update
To update the firmware of the GSA-E40L please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below SE01
The drives must be original LG branded drives with the DVD Writer
model number GSA-E40L(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC's with Windows Vista,
Windows XP and Windows 2000.
1. Connect the drive at USB Port.
2. Download the file GSA-E40L_SE02(EW).ZIP to a folder of your choice.
This download includes this "Read me(ew)" text file, as well as the GSAE40L_SE02.EXE
program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the GSAE40L_SE02.EXE program
and Firmware upgrade will be automatically started.
When the UPGRADE is complete the screen should indicate "ReBoot" message
and advise you to reboot the system. You will need to reboot your PC
The update will be complete, after you reboot your system.
Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Why does water leak after a filter replacement? Symptom 1. Water leaks from the bottom of a water purifier after replacing a filter. Cause 1.If the filter is not assembled properly, water can leak from a misaligned joint due to water pressure. How to fix 1. Check the filter. If water ...
Why does a gurgling sound occur when water is dispensed? Symptom 1. I hear a gurgling sound after dispensing water. Cause 1. The gurgling sound can be heard when water fills the water tank and it is not a sign of defect. 2. The level of noise can be higher as water feeds the tank fast...
When should I replace the filters? Symptom 1. When to replace filters. Recommended Filter Change Cycle 1. * Applicable model : WQD*, WQS*, WHD*, WCD, WAD* 2. Filter change cycle is based on an assumption of use of 10 liters per day in a household. Change cycle may vary by model, but a...
Water purifier does not work and lights are off. What should I do? Symptom 1. Lights turned off during use. Checkpoint 1. Please close the water supply valve and check if the power cord is firmly plugged to an outlet. How to fix 1. Try plugging in other appliances to the same outlet t...
Can underground water used for a water purifier? (Filter type varies by model) Symptom 1. Can I use underground water for a water purifier? Checkpoint 1. The water purifier is designed to filtrate tap water. 2. Please do not use underground water as it can cause a filter blockage or m...