MULTI V IV
- EXCEPTIONAL EFFICIENCY
- OUTSTANDING PERFORMANCE
- DESIGN WITHOUT LIMIT
- CYCLE & SERVICE OPTIMIZATION
World's First Class, Rated and Part Load Efficiency
LG’s 4th Generation Inverter Compressor
The new high-side shell (HSS) scroll inverter compressor employs a BLDC-type motor coil to maximize efficiency in part load conditions. This exceptional efficient inverter compressor also boasts an increase in high-frequency operation from 120Hz to 150Hz.
HiPOR™ (High Pressure Oil Return)
Conventional models can't fully return refrigerant to compressor when returning oil. However, LG's HiPOR™ reduces compressor energy wastage by returning oil directly into the compressor, not from refrigerant pipe. Through this, it provides superior efficiency and a high level of reliability.
Cooling Optimized Heat Exchanger Circuit
By extending the path length of the heat exchanger and decreasing the number of paths, the refrigerant is able to throw off more heat. Through a rise in the heat exchange rate, the heat exchanger contributes to increase cooling efficiency.
Cooling Operation Range Up to 54℃
Thanks in large part to LG’s advanced inverter compressor and unique heat exchanger design, MULTI V IV is able to provide reliable operation even when the outside temperature soars to 54°C, exceeding the previous norm limit by 11 degrees.
* Stable cooling operation can be expected up to 43°C.
Fast Cooling via Advanced Inverter
Thanks to LG’s all inverter compressor system and high performance cycle design, MULTI V IV delivers fast cooling by operating two compressors simultaneously. In conventional models, inverter compressor and on/off compressor operate only one by one at a time, which taking far longer to reach maximum capacity.
Fan with Less Noise and Higher Air Volume
The design of cannon fan creates more separation between blades and allows for a reduction in the system’s vortex. This increases the total air volume up to 50cmm (m3 per minute), and it also decreases the level of noise by 4dB(A).
Self-Cooled Printed Circuit Board (PCB) Protection
The temperature of PCB should be maintained at proper levels regardless of the rise in outdoor temperature. Self-cooled PCB Protection is a unique system which employs separate pipes to cool the PCB. MULTI V IV is able to minimize the loss of cooling capacity and refrigerant.
- PCB is cooled by air through heat pipe behind control box
- Maintain cooling performance regardless of outdoor temperature
Expanded Piping Capabilities
MULTI V IV inverter technology and subcooling control circuit technology allows greater piping length and outstanding elevation differences. A cooling system can be implemented more flexibly in a high-rise building or complex facilities, reducing the designer's work time and providing more efficient design.
High Elevation Technology between Indoor and Indoor
MULTI V IV provides a maximum 40m of height difference between the indoor units without any loss in cooling capacity thanks to the new cycle and compressor technology.
Light Weight Outdoor Units
Elimination of Common Pipes between Outdoor Units
Due to the elimination of common pipes between outdoor units, installation time is reduced and reliability is enhanced.
Upgraded Fault Detection & Diagnosis (FDD)
The inclusion of FDD elements - auto start-up, auto refrigerant check, black box functionality, simultaneous evaluation, and auto refrigerant collection, provides the optimal solution for user reliability and ease of maintenance.
- Auto Commissioning Mode
- Auto Refrigerant Collection
- Auto evaluation of refrigerant amount and charging
- Able to access LGMV (LG Monitoring View) by smartphone
- Piping & wiring error check-up
- Black box function
Auto Commissioning Mode
Commissioning time has been reduced up to 25%, from 60 minutes to 45 minutes. Remote control, wireless reporting has been provided.
Auto Refrigerant Collection
If an indoor unit experiences a problem, any remaining refrigerant is pumped down and transferred to normally functioning outdoor units. Conversely, if an outdoor unit malfunctions, any refrigerant left is pumped out to fully operational indoor units. This collection function helps to prevent the loss of refrigerant,while also making maintenance easier.
Smartphone Monitoring & Control
|Casing Color||Warm Gray /Morning Gray|
|Heat Exchanger||Gold fin|
|Type||Hermetically Sealed Scroll|
|Piston Displacement (cm3/rev)||(43.8 × 2) × 2|
|Number of Revolution (rev/min)||(3,600 × 2) × 2|
|Motor Output x Number (W x No.)||(4,200 × 2) × 2|
|Starting Method||Direct On Line|
|Oil Charge (cc)||7,200|
|Motor Output x Number (W)||(600 × 2) × 2|
|Air Flow Rate(High) - m3/min||290 × 2|
|Air Flow Rate(High) - ft3/min||10,241 × 2|
|Discharge (Side / Top)||TOP|
|Liquid - mm(inch)||19.05(3/4)|
|Gas - mm(inch)||41.3(1 5/8)|
|kg||260 × 2|
|Cooling - dB(A)||62.5|
|High pressure protection||High pressure sensor / High pressure switch|
|Compressor/Fan||Over-heat protection / Fan driver overload protector|
|Inverter||Over-heat protection / Over-current protection|
|No.× mm2 (VCTF-SB)||2C × 1.0 ~ 1.5|
|Precharged Amount (kg)||6.5 × 2|
|Control||Electronic Expansion Valve|
|Ø, V, Hz||3, 380~415, 50 / 3, 380, 60|
|Number of outdoor units||2|
|Number of maxmum connectable indoor units||61(64)|
QUESTIONS? LET US HELP
Simply choose a support option from the icons below:
Call an LG Support Representative on
Nigeria : 0800 9811 5454 (Toll Free)
Angola : +244 933 772 011
Angola : +244 933 772 012
Benin : +229 21 37 74 09
Benin : +229 21 37 74 10
Cameroon : +237 671 385 050
Cote D'lvoire : +225 2031 9454
DR Congo : +243 999555999
DR Congo : 99997774
Gabon : +241 0172 1790
Gambia : +220 4375900
Gambia : +220 7955815
Ghana : +233 302247770
Ghana : +233 302247771
Guinea Conakry : +224 664 199 999
Liberia : +231 880538538
Liberia : +231 770000391
Mali : +223 2029 0058
Mauritania : +222 45 24 24 24
RP Congo : +242 066 625 555
Senegal : +221 338 596 902
Togo : +228 22 37 02 04
Monday to Friday : Open
Saturday - Sunday : Closed
Bank Holidays : Closed
Send an Email to LG Customer Service and Support to receive response from LG support