◆ Improvement Point
-.Improvement of Windows OS install by Boot Camp of Mac PC
(With ML03 or lower version, in some Mac PC, Windows OS install is failed by using Boot Camp.
ML04 includes the improvement of this failure.)
To update the firmware of the BP40NS20 please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below ML04
The drives must be original LG branded drives with the Blu-ray Writer model number
BP40NS20(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC’s with Windows 8, 7, Vista, and Windows XP
[Critical Instructions] (to be followed carefully)
1. Connect the drive at USB port by it self.
2. Download and unzip the file BP40NS20_ML04 for Widnows.ZIP to a folder of your choice.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
5. Go into the folder with the update file and double click the BP40NS20_ML04.exe
program and click the “update” button (red). Once the update is complete,
you will see “Firmware Update Complete” and the button will become green
and advise you to reboot the system. You will need to reboot your PC.
The update will be complete, after you reboot your system.
※ WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.