No Water Inlet - Inlet Filter needs Cleaning
1st : Error can occur if water pressure is low. Check water pressure.
2nd : The mesh Filter in the connecting area of the water supply hose is clogged from water debris and contaminents.
When the filter is blocked, it will intervene with the water supply. Close the water, disconnect the hose from
washing machine and clean the filter before re using.
How to clean filter
① Close the tap and unplug the power cord.
② Disconnect the water supply hose by rotating counter-clockwise and then remove the filter.
[Remove filter using long nose plier]
[Rust on filter]
③ Clean the debris from the filter with flowing water and a brush and then re install it.
they are colur coded to identify cold water (bue) and hot water (orange)
[Clean with brush and assemble.]
※ Note : "IE“ error occurs when the inlet water does not reach the correct level within 8 minutes from when the water supply started.