Skip to Contents
Close

Help Library

Find help information for your LG product

Learn about product installation, maintenance, and troubleshooting using our search options.

Door Installation Example

  • How to Install and Operate
  • Door Removal / Installation
  • Troubleshooting
  • Refrigerators

DOOR INSTALLATION EXAMPLE - 3 DOOR MODEL

Install the right-side door first. Lower the door onto the middle hinge pin as shown. Make sure the plastic sleeve is inserted in the bottom of the door.

Fit the top hinge (1) over the hinge lever latch (2) and into place. Rotate the lever (3) counterclockwise to secure the hinge.

Install the grounding screw (4).

Connect the wire harness (5).

Hook the tab on the door-switch side of the cover (6) under the edge of the wire opening in the cabinet top. Position the cover into place. Insert and tighten the cover screw (7).

Install the left side door.

Lower the door onto the middle hinge pin.

Install the grounding screw (4) and connect all the wire harnesses (5).

Push the water supply tube (6) into the hole on the top case and pull it through the back plate.

Insert the water supply tube into the connector.

Insert the tube at least 5/8 in. (15 mm) into the connector.

Hook the tab on the door-switch side of the cover under the edge of the wire opening in the cabinet top. Position the cover into place. Insert and tighten the cover screw.


Article Feedback

Q1. Overall, how satisfied were you with the usefulness of this information?
Q1-1. Why were you dissatisfied withthe usefulness of this information?

Characters left : 500 / 500