If you can't find any desired results, please try using the following menu

Product Support
Receive help on your LG product
Receive help on your LG product
Check out the latest information related to this product.
For the most accurate technical information regarding features, specifications, installation and operation of your LG product, please refer to the Owner's Manual and other documents available for this product.
Software upgrades include device drivers and firmware updates only for specific models. Check your owner's manual to determine if your product supports software upgrades.
1. General information
◆ Model:BP40NB30(Svc code : NB31)
◆ Ver:ME03
◆ Improvement Point
-.Improvement of Windows OS install by Boot Camp of Mac PC
(With ME02 or lower version, in some Mac PC, Windows OS install is failed by using Boot Camp.
ME03 includes the improvement of this failure.)
To update the firmware of the BP40NB30(Svc code NB31) for Mac OS. please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below ME03
The drives must be original LG branded drives with the Blu-ray Writer model number
BP40NB30(Svc code NB 31)
If svc code is not NB31, the firmware will not be updated.
Please check SVC Code on the Main Label.
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC’s with Mac OS(10.6.4, 10.8.2, 10.9.3)
2. How to update the firmware
A. connect the drive at USB port by it self
B. Please unzip BP40NB30(Svc code NB31)_ME03(Mac).Zip file on Mac OS.
C. clink "BP40NB30_ME03.app" file.
D. Click "Flash it!" button
1. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
2. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
3. Please never disconnect USB cable while updating firmware.
4. The update will be complete, after you reboot your system.
WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Thanks.
◆ Model:BP40NB30(SVC Code NB31)
◆ Ver:ME03
◆ Improvement Point
Improvement of Windows OS install by Boot Camp of Mac PC
(With ME02 or lower version, in some Mac PC, Windows OS install is failed by using Boot Camp.
ME03 includes the improvement of this failure.)
To update the firmware of the BP40NB30(SVC Code NB31) please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below ME03.
The drives must be original LG branded drives with the Blu-ray Writer model number
BP40NB30(SVC Code NB31).
If svc code is not NB31, the firmware will not be updated.
Please check SVC Code on the Main Label.
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC’s with Windows 8, 7, Vista, and Windows XP
1. Connect the drive at USB port by it self.
2.Download and unzip the file WP40NB30(SVC Code NB31)_MW03(windows).ZIP to a folder of your choice.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
5. Go into the folder with the update file and double click the BP40NB30(SVC Code NB31)_ME03(windows).exe
program and click the “update” button (red). Once the update is complete,
you will see “Firmware Update Complete” and the button will become green
and advise you to reboot the system. You will need to reboot your PC.
The update will be complete, after you reboot your system.
※ WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Thanks.
1. General information
◆ Model:BP40NB30
◆ Ver:CE03
◆ Improvement Point
-.Improvement of Windows OS install by Boot Camp of Mac PC
(With CE02 or lower version, in some Mac PC, Windows OS install is failed by using Boot Camp.
CE03 includes the improvement of this failure.)
To update the firmware of the BP40NB30 for Mac OS,please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below CE03
The drives must be original LG branded drives with the Blu-ray Writer model number
BP40NB30.
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC’s with Mac OS(10.6.4, 10.8.2, 10.9.3)
2. How to update firmware
A. connect the drive at USB port by it self
B. Please unzip BP40NB30_CE03(Mac).Zip file on Mac OS.
C. C. clink "BP40NB30_CE03.app" file.
D. Click "Flash it!" button
1. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
2. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
3. Please never disconnect USB cable while updating firmware.
4. The update will be complete, after you reboot your system.
WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Thanks.
◆ Model:BP40NB30
◆ Ver:CE03
◆ Improvement Point
-.Improvement of Windows OS install by Boot Camp of Mac PC
(With CE02 or lower version, in some Mac PC, Windows OS install is failed by using Boot Camp.
CE03 includes the improvement of this failure.)
To update the firmware of the BP40NB30 please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below CE03
The drives must be original LG branded drives with the Blu-ray Writer model number
BP40NB30(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC’s with Windows 8, 7, Vista, and Windows XP
1. Connect the drive at USB port by it self.
2. Download and unzip the file BP40NB30_CE03(windows).ZIP to a folder of your choice.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
5. Go into the folder with the update file and double click the BP40NB30_CE03(windows).exe
program and click the “update” button (red). Once the update is complete,
you will see “Firmware Update Complete” and the button will become green
and advise you to reboot the system. You will need to reboot your PC.
The update will be complete, after you reboot your system.
※ WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Thanks.
1. General information
◆ Model:BP40NB30(Svc code : NB31)
◆ Ver:ME02
◆ Improvement Point
-. Mac OS(10.6.4, 10.8.2,10.9.3) support
-. BD-R M-Disc Support
To update the firmware of the BP40NB30(Svc code NB31) for Mac OS. please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below ME02
The drives must be original LG branded drives with the Blu-ray Writer model number
BP40NB30(Svc code NB 31)
If svc code is not NB31, the firmware will not be updated.
Please check SVC Code on the Main Label.
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC’s with Mac OS(10.6.4, 10.8.2, 10.9.3)
2. How to update the firmware
A. connect the drive at USB port by it self
B. Please unzip BP40NB30(Svc code NB31)_ME02 for Mac.Zip file on Mac OS.
C. clink "BP40NB30_ME02.app" file.
D. Click "Flash it!" button
1. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
2. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
3. Please never disconnect USB cable while updating firmware.
4. The update will be complete, after you reboot your system.
WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
1. General information
◆ Model:BP40NB30
◆ Ver:CE02
◆ Improvement Point
-. Mac OS(10.6.4, 10.8.2,10.9.3) support
-. BD-R M-Disc Support
To update the firmware of the BP40NB30 for Mac OS. please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below CE02
The drives must be original LG branded drives with the Blu-ray Writer model number
BP40NB30.
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC’s with Mac OS(10.6.4, 10.8.2, 10.9.3)
2. How to update firmware
A. connect the drive at USB port by it self
B. Please unzip BP40NB30_CE02 for Mac.Zip file on Mac OS.
C. C. clink "BP40NB30_CE02.app" file.
D. Click "Flash it!" button
1. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
2. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
3. Please never disconnect USB cable while updating firmware.
4. The update will be complete, after you reboot your system.
WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
◆ Model:BP40NB30(SVC Code : NB31)
◆ Ver:ME02
◆ Improvement Point
-. BD-R M-Disc Support
To update the firmware of the BP40NB30(SVC Code : NB31) please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below ME02
The drives must be original LG branded drives with the Blu-ray Writer model number
BP40NB30(SVC Code : NB31).
If svc code is not NB31, the firmware will not be updated.
Please check SVC Code on the Main Label.
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC’s with Windows 8, 7, Vista, and Windows XP
1. Connect the drive at USB port by it self.
2. Download the file BP40NB30(SVC Code: NB31)_ME02.ZIP to a folder of your choice.
This download includes this “BP40NB30(SVC Code : NB31)_ME02_Read me(ew)” text file,
as well as the BP40NB30(SVC Code : NB31)_ME02.EXE program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
5. Go into the folder with the update file and double click the BP40NB30(SVC Code : NB31)_ME02.exe
program and click the “update” button (red). Once the update is complete,
you will see “Firmware Update Complete” and the button will become green
and advise you to reboot the system. You will need to reboot your PC.
The update will be complete, after you reboot your system.
※ WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Thanks.
◆ Model:BP40NB30
◆ Ver:CE02
◆ Improvement Point
-. BD-R M-Disc Support
To update the firmware of the BP40NB30 please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below CE02
The drives must be original LG branded drives with the Blu-ray Writer model number
BP40NB30(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC’s with Windows 8, 7, Vista, and Windows XP
1. Connect the drive at USB port by it self.
2. Download the file BP40NB30_CE02.ZIP to a folder of your choice.
This download includes this “BP40NB30_CE02_Read me(ew)” text file,
as well as the BP40NB30_CE02.EXE program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
5. Go into the folder with the update file and double click the BP40NB30_CE02.exe
program and click the “update” button (red). Once the update is complete,
you will see “Firmware Update Complete” and the button will become green
and advise you to reboot the system. You will need to reboot your PC.
The update will be complete, after you reboot your system.
※ WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Thanks.
If you can't find any desired results, please try using the following menu