Receive help on your LG product
Receive help on your LG product
Check out the latest information related to this product.
For the most accurate technical information regarding features, specifications, installation and operation of your LG product, please refer to the Owner's Manual and other documents available for this product.
Software upgrades include device drivers and firmware updates only for specific models. Check your owner's manual to determine if your product supports software upgrades.
* SW information
1) Disable the skype due to spec out.
2. Applicable model list
3. Release History
1. Youtube bug patch(OOM issue)
1. DIAL(Discovery And Launch) protocol specification is applied
2. Input function added to Talk on Social Center
3. Password to initialize TV Lock password has changed to 6-digit
4. Pop-up message is added when try to pare with MR13
1. refer to below
1. Disable the skype due to spec out.
1. SmartShare PC SW(DLNA)
[PC requirement for installing LG SmartShareTM]
CPU Minimum spec : Intel Pentium4 2.0G uper / AMD Sempron 2000 uper
Recommended spec : Intel Pentium Dual Core uper / AMD Sempron 64x2 uper
RAM Minimum spec : 1GB uper
Recommended spec : 2GB uper
VGA Minimum spec : Memory 64MB, Resolution 1024*768 uper, Video card 16bit uper
Recommended spec : Memory 128MB, Resolution 1024*768 uper, Video card 16bit uper
HDD 200MB uper
OS Windows XP (Service pack 2 uper), Windows Vista, Windows 7, Windows 8
l Windows Media Player : 11.0.5721.5280 uper
Network 100MB Ethernet, Wireless Lan WLAN(IEEE 802.11g) uper
2. SmartShare PC SW(MediaLink)
To use MediaLink, the PC needs to have PLEX.
With Media Link, you can enjoy contents(Movies/Music) stored on PC on LG Smart TV with convenient UI.
[System requirements for installing PLEX]
- Minimum requirements
PC with at least 1.6 GHz Intel Core Duo Processor and Windows XP SP3, minimum 512 MB
- Recommendations for HD Content transcoding (720p and 1080p)
PC with at least 2.4 GHz Intel Core Duo Processor and Windows XP SP3, minimum 2 GB of
Supports Windows XP, Vista and Windows 7
- Network requirements
ADSL/Cable/Wi-Fi Internet connection for media metadata output and update
Wired network: Ethernet network with 100 Base-T or 1000 Base-T
Wireless network: Recommends uncongested 802.11n & supports media play on wireless
How do I set the mode to watch 3D image? How to fix - Input modes which support 3D effect are HDMI/RGB-PC/USB/DLNA/Component/DTV signal. ※ 3D effect supporting input mode varies depending on models, so please refer to user guide for 3D input Supporting format as follows. HDMI cable is...
I want to use recording mode. Symptom - Recording function can be performed by connecting USB device. - Input mode supporting the recording varies depending on models, so please refer to user’s manual. ※ HDMI, component, RGB input modes are not supported. - For some models, format USB...
I want to delete a particular channel Symptom If you want to delete Auto Tuning set channels, you can add/delete channels in the Channel Edit. ※ If you switch channel with up/down button, it doesn’t show the deleted channel, but if you press the channel number, it shows the deleted ch...
No video, no audio Symptom No video and audio How to fix 1. If TV is not turned on, check the front power on/off switch. If TV is not turned on with remote control, turn the power on with on/off switch then turn on TV with remote control. (If TV is turned off with power on/off switch,...
I can't connect to wireless Media-Box Symptom To connect wireless media box How to fix Your TV must be high-tech wireless TV embedded with non-compression and transmission technology. Wireless TV communication is similar with walkie-talkie and you need to set channel of TX & RX module...