Receive help on your LG product
Receive help on your LG product
Check out the latest information related to this product.
Software upgrades include device drivers and firmware updates only for specific models. Check your owner's manual to determine if your product supports software upgrades.
※ New firmware (ver. 1.02) for only GSA-H54N(Internal 18X Super multi DVD Writer)
◆ Improvement Point
-. Improve writing quality for DVD+R(CMC MAG M02 16X)
Refer to the attached file
GSA-H54N Version 1.02 Firmware Update
To update the firmware of the GSA-H54N please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below 1.01.
The drives must be original LG branded drives with the DVD Writer
model number GSA-H54N(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC's with Windows Vista,
Windows XP and Windows 2000.
1. Connect the drive as "master" by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the "master" position.
2. Download the file GSA-H54N_1.02.ZIP to a folder of your choice.
This download includes this "Read me(ew)" text file, as well as the GSA-H54N_1.02.EXE
program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the GSA-H54N_1.02.EXE program
and Firmware upgrade will be automatically started.
When the UPGRADE is complete the screen should indicate "ReBoot" message
and advise you to reboot the system. You will need to reboot your PC
The update will be complete, after you reboot your system.
Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Black and white or scrambled image Symptom The image turns into black and white suddenly. How to fix - If it turns into black and white while watching, press the PAUSE button for 5 seconds without disc in it. Or check PAL ↔ NTSC switch at the rear. ※ Change into PAL ↔ NTSC. - Change i...
I can't turn it on Symptom You can’t turn on the power. Things to check 1. Try to connect the power cable again. Check the outlet on the wall. 2. Press EJECT button on the product and check if the door opens. ※ If there is a problem with full display window, you may check if you can t...
How do I connect TV and DVD_Bluray Player? Things to check For TV and DVD(Blueray), you can connect through HDMI, Component, or Standard video. For audio, you can connect through RCA connector, HDMI or optical fiber cable. How to connect ① Connecting TV and DVD_Blueray through Standar...
How long can I record video? Symptom How long can I record? How to fix ▶Record Mode(4.7GB based) : HQ/XP(High Quality: 1hour), SQ/SP(Standard Quality: 2hours), LQ/LP(Low Quality: 4hours), EQ/EP(Extend Quality, 6hours)
I want to connect audio and video Symptom Do you want to use audio when watching video? How to fix - How to connect video and audio Connect one of the Recorder’s DIGITALAUDIO OUTPUTjacks (OPTICAL, COAXIAL) to the corresponding in jack on your amplifier. Use an optional digital (Optica...