Skip to Contents
Close

How-to & Tips

Find help information for your LG product

Learn about product installation, maintenance, and troubleshooting using our search options.

LG Room Airconditioner : Temperature Settings

  • Others
  • Others
  • Operation
  • Split Air Conditioners
  • Last Updated 09/09/2016

Running in Cool Mode:

During cool mode the fan circulates air and the compressor runs to actively cool the room. When the desired room temperature is reached the compressor will stop, but the circulation fan will continue to run. The fan speed can be adjusted.

Activating Cool Mode on a Digital Control Panel:

1. Press POWER.
2. Use the Up and Down arrow keys to set the desired temperature.
3. Press the MODE key repeatedly until " Cool " mode is selected

4. If needed, press the FAN key on the remote or control panel to adjust fan speeds

Running in Fan Mode:

Fan mode circulates the air but the compressor does not run. This allows you to keep air in the room moving, while not having to use extra power to actively cool the room.

Activating Fan Mode on a Digital Control Panel:

1. Press POWER.
2. Press the MODE key repeatedly unit "Fan" mode is selected.
3. Press the FAN SPEED key on the remote or control panel to adjust fan speeds.

Running in Energy Saver Mode:

This mode reduces power input from rated

power input during the cooling mode.

*Active energy control operation : 80% / 60% /40% compared to the rated power input.

Energy saver helps reduce power consumption by automatically turning off the circulation fan as well as the exhaust fan when the compressor is off. The air conditioner will automatically cycle both fans on and off with the compressor as needed for cooling.

Activating Energy Saver Mode on a Digital Control Panel:

1. Press  to turn on the power.

2. Press repeatedly to select the cooling operation.

3. Press  to select  

 are displayed on the screen

 

Indoor air purification (Auto Clean operation ):

 

In the cooling and dehumidifying operations, moisture is generated inside the indoor unit. Use the auto cleaning function to remove such moisture.

 

1. Press and hold it for longer than 3 seconds.

is displayed on the display screen.

 

 

 

 

 

Article Feedback

1. Overall, how satisfied were you with the usefulness of this article?
1.1 Why did the article not resolve your issue?

Characters left : 500 / 500