360 CAM consists of the Shoot key below the lens and the Power/Mode keys on the side of the device.
Long-press the Power key for 1 second to turn on 360 CAM or for 4 seconds to turn it off.
How to connect 360 CAM with your phone
How to take photos/videos
You can use 360 CAM to take photos and videos in 360° or 180° mode. The 360° mode is used to take photos and videos in spherical form, whereas the 180° mode is used to take them in rectangular form. Try to change the resolution and viewing angle in 360 CAM Manager app.
Power Saving Mode
You can use the power saving mode in 360 CAM. Run power saving mode from the device to turn off all functions except Bluetooth and shift to maximum power saving mode. 360 CAM Manager
You can set the time for automatically entering power saving mode within the app.
Using power saving mode: Long-press the power/mode button
Exiting power saving mode: Press the power/mode button or press the capture button
Setting up the Wi-Fi password
When you connect 360 CAM to your phone for the first time, the phone is automatically connected without entering your Wi-Fi password. But if using a phone that has been connected before, you must enter your Wi-Fi password. The initial Wi-Fi password is 00 + the last 6 digits of the serial number. The Wi-Fi password can be changed in the 360 VR Manager app's settings.
Resetting the Wi-Fi
If you cannot change the existing password with a phone that has been connected before, you may reset the Wi-Fi connection to make a Wi-Fi connection. After resetting the Wi-Fi connection, the mobile phone and 360 CAM can be connected without entering a password. Long-press the Power key + Shoot key for 3 seconds to reset the connection.
You can force-shutdown 360 CAM when it does not work. Long-press the Power/Mode key for 12 seconds.
Resetting the device
Long-press the Power/Mode key + Shoot key for 8 seconds. Release the keys at the second "beep," and then press the Power/Mode key within 4 seconds.