Discontinued Product

Makes doing laundry a breeze.

7.1 cu. ft. Large Capacity Dryer with LED Display and Rear Controls (Gas)

DLG4802W

  • Large 7.1 cu ft Capacity
  • Electronic Control Panel with LED Display
  • Sensor Dry System
  • 3-Minute Smart Installation Check
Enlarge

7.1 cu. ft. Large Capacity Dryer with LED Display and Rear Controls (Gas)

DLG4802W

DOWNLOAD PDF
  • Options
  • Drying Levels
  • Program Names
  • Temperature Levels
  • Dry Times
  • More Time, Less Time, Wrinkle Care, Custom Program, Signal Volume, Child Lock
  • Very Dry, More Dry, Normal Dry, Less Dry, Damp Dry
  • Sensor Dry: Cotton/Normal, Heavy Duty, Bulky/Bedding, Delicates, Perm. Press/Casual; Manual Dry: Speed Dry, Freshen Up, Air Dry
  • High, Medium High, Medium, Low, Ultra Low
  • 60 min., 50 min., 40 min., 30 min., 20 min., More Time/Less Time
  • Sensor Dry
  • Precise Temperature Control with Variable Heater
  • Yes
  • Yes
  • LoDecibel™ Quiet Operation
  • SmartDiagnosis™
  • FlowSense™ Duct Clogging Indicator
  • Wrinkle Care Option
  • Remaining Time Display/Status Indicator(s)
  • End of Cycle Signal
  • Child Lock
  • Drum Light
  • Venting Option
  • Reversible Door
  • Leveling Legs
  • Yes
  • Yes
  • Yes
  • Yes
  • Yes
  • Yes
  • Yes
  • Yes
  • Electric: 4 Way Venting, Gas: 3 Way Venting
  • Yes
  • 4 Adjustable Legs
  • Drum
  • Top Plate
  • Cabinet
  • Control Panel
  • Transparent Door Glass
  • Door Rim
  • Available Colors
  • Aluminized Alloy Steel
  • Plastic
  • PCM
  • Plastic
  • Yes
  • Silver
  • White
  • LP Conversion Kit
  • 383EEL3002D
  • Dryer Type
  • Type of Display
  • Dimensions (WxHxD)
  • Capacity
  • Designer Color
  • Design Look
  • Soft-touch Button Controls
  • Warranty
  • Gas
  • Intelligent Electronic Controls with Dual LED Display
  • 27" x 38 11/16" x 29 3/4"
  • 7.1 cu. ft.
  • White
  • Rear Control
  • Yes
  • 1 Year Parts and Labor
  • Width
  • Height
  • Depth
  • Depth with Door Open
  • Carton (WxHxD)
  • Weight (Product)
  • Weight (Shipping)
  • 27"
  • 43 7/8"
  • 29"
  • 51"
  • 29 1/2" x 46" x 31"
  • 125 lbs.
  • 147 lbs.
Back To Top

 

18 Questions & 18 Answers

Ask Your Questions, Share Your Answers

Ask your questions. Share your answers.

 
 
« Back
 
 
1 year, 11 months ago
User Name:
Paull
 
Please wait while more information about Paull is loaded.
Additional information about Paull could not be loaded.
0points
0out of 0found this question helpful.
HelpfulNot Helpful

Answers

Answer: 
Your new dryer is shipped to vent to the rear.
It can also be configured to vent to the bottom or side (right-side venting is not available on gas models).

An adapter kit, part number 383EEL9001B, may be purchased from your LG retailer. This kit contains the necessary duct components to change the dryer vent location.

http://www.lg.com/us/support/find-parts
1 year, 11 months ago
User Name:
Nadine
 
Please wait while more information about Nadine is loaded.
Additional information about Nadine could not be loaded.
0points
0out of 0found this answer helpful.
HelpfulNot Helpful

Answer: 
Our dryers come with rare venting but you can easily convert LG dryers to side or bottom venting the manual explains it step by step: page 15 "Changing the Dryer Vent Location"

http://www.lg.com/us/support-product/lg-DLG4802W#
1 year, 11 months ago
User Name:
Nadine
 
Please wait while more information about Nadine is loaded.
Additional information about Nadine could not be loaded.
0points
0out of 0found this answer helpful.
HelpfulNot Helpful
Has staff answer
Has expert answer
 
1 answer

WHERE DO I FIND THE 3 MINUTE DRYER INSTALLATION CHECK?

2 years, 4 months ago
User Name:
Renee
0points
0out of 0found this question helpful.
HelpfulNot Helpful

Answers

Answer: 
We appreciate your interest in this product and its proper installation and operation. To activate the installation test, press and hold the TEMP and SIGNAL buttons at the same time. While holding these buttons, press the POWER ON/OFF button. The dryer will show InS in the number display to indicate that it is in the Duct Condition Testing Mode. Press the START/PAUSE button. The dryer will run for approximately 2 minutes to test for blockages or restrictions to air flow in the ductwork. Check the display for results. During the two minute test cycle, monitor the FLOW SENSE display on the control panel. If FLOW SENSE is not displayed, when the cycle ends, the exhaust system is adequate. If the exhaust system is severely restricted, the display will show FLOW SENSE. Other problems may also be shown with error codes. Refer to page 27 of your manual for error code details and solutions. FLOW SENSE indicates that the exhaust system is severely restricted. Have the system checked immediately, as performance will be poor. At the end of the test cycle, [ --] will display. The test cycle will end and the dryer will shut off automatically after a short delay.
2 years, 4 months ago
User Name:
NeilE
 
Please wait while more information about NeilE is loaded.
Additional information about NeilE could not be loaded.
0points
0out of 0found this answer helpful.
HelpfulNot Helpful
Has staff answer
Has expert answer
 
1 answer

how do you reverse the door swing

2 years, 4 months ago
User Name:
Anonymous
0points
0out of 0found this question helpful.
HelpfulNot Helpful

Answers

Answer: 
To avoid damage to the dryer or the door, support the door with a stool or box that fits under the door, or have an assistant support the weight of the door. Avoid dropping the door to avoid damage to the door or the floor. THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow the instructions below can result in damage to the dryer, property damage or injury to persons.
1.Open the door and remove the two plastic hole caps on the catch side by gently prying up with a flat blade screwdriver. Save these for step 6. 2. While supporting the door, remove the 4 screws, two from each hinge. Set the door aside face down on a protected surface to prevent damage to the door or the work surface. 3. With the door on a protected surface, remove the 12 screws on each side of the door and lift off the inner door frame using a flat blade screwdriver. Remove the latch hook and blank and move them to the opposite side. 4. Remove the 4 screws securing the hinges to the door frame. Remove the two plastic cover caps. Reinstall the hinges and cover caps on the opposite sides from which they were removed. 5. With the hinges and cover caps in the new locations, remount the inner door frame onto the outer door frame with the screws removed in step 3 above. 6. Reinstall the door with the screws from step 1,2. 7. Test the swing of the door to make sure the hinges and latch are properly aligned and that the door closes and latches correctly.
2 years, 4 months ago
User Name:
NeilE
 
Please wait while more information about NeilE is loaded.
Additional information about NeilE could not be loaded.
0points
0out of 0found this answer helpful.
HelpfulNot Helpful
Has staff answer
Has expert answer
 
1 answer

Why is the cooling light on while the drying light is on?

none
2 years, 4 months ago
User Name:
dt
austin texas
0points
0out of 0found this question helpful.
HelpfulNot Helpful

Answers

Answer: 
The cooling light should not be on during the whole dry cycle. If it comes only only near the end of the cycle, then this is normal operation. If it is on during the whole cycle, then the unit may require service. To make service arrangements, you may either contact our Customer Interactive Center at 800-243-0000, or you can check our Repair Provider Lookup on our website, at http://www.lg.com/us/support/repair....
2 years, 4 months ago
User Name:
NeilE
 
Please wait while more information about NeilE is loaded.
Additional information about NeilE could not be loaded.
0points
0out of 0found this answer helpful.
HelpfulNot Helpful
kit to side vent for a dryer DLG4802W
Category: I do not own this product
2 years, 3 months ago
User Name:
ANA MARIA
HOME DEPOT 6402, CAROLINA, PUERTO RICO
0points
0out of 0found this question helpful.
HelpfulNot Helpful

Answers

Answer: 
Hello Ana Maria,
thank you for your question.

You will find the retail price for the 363EEL9001B Adapter Kit on our Parts Distributor's websites (for LG Parts and Accessories).

Use the following link, click on the United States map to locate the nearest Parts Distributor:
http://www.lg.com/us/support/parts/support-find-parts.jsp

We appreciate your feedback, please give us a “thumbs up” if this answer is helpful to you; and please let us know if we can assist you with anything else.

Have a lovely week!
2 years, 3 months ago
User Name:
Nadine
 
Please wait while more information about Nadine is loaded.
Additional information about Nadine could not be loaded.
+1point
1out of 1found this answer helpful.
HelpfulNot Helpful
2 3 4 Next>>
2 3 4 Next>>

Looking for a dryer that is quiet, can hold large loads, and adjusts the drying time for you? Look no further. This large capacity dryer, with innovative features like the Sensor Dry system and SmartDiagnosis, will have you begging to do more laundry. The Electronic Control Panel with soft-touch buttons makes it easy to find the cycle and setting that's just right for each load.

Design, features and specifications subject to change without notice. Screen images simulated and/or dramatized. Some features in videos may not be available on all models. Please refer to the TECHNICAL SPECIFICATIONS tab for a complete list of features by model.

Recently Viewed

Get The Latest Product News

Please enter your email address to sign up for our Newsletter.

close