CONTROL PANEL – SINGLE OVEN*

Control panels may vary

GOOD TO KNOW:

  • Each time a pad is pressed a beep will sound.
  • The power level decreases or increases by 0.5 from 9.0 through 3.0 (by 0.2 from 3.0 through 1.0). Lo is the lowest power level available.
  • To scroll through the power levels quickly press and hold the – or + key pads until the power level desired is reached.
COOKTOP ELEMENT CONTROLS
  • LEFT REAR ELEMENT INDICATOR (Single element)
  • WARMING ZONE ELEMENT INDICATOR
  • RIGHT REAR ELEMENT INDICATOR (Single element)
  • LEFT FRONT ELEMENT INDICATOR (Double element)
  • RIGHT FRONT ELEMENT INDICATOR (Single element)
  • SELECT INDICATOR Use to select single or double elements.
  • HOT SURFACE INDICATOR: Displayed until the surface has cooled to approximately 150°F (66°C), or when the self clean cycle ends.
COOKTOP ELEMENT CONTROLS

To control a Single Element:

1. Press the ON/OFF button that controls the element that you would like to use.

2. Press the + button once to adjust the element temperature to Hi, or the – button once to adjust the element temperature to Lo.

3. Use the – / + buttons to adjust the element temperature settings. The element temperature settings are adjustable at all times.

4. To turn off the element after cooking press the ON/OFF button once.

To control a Dual Element:

1. Press the ON/OFF button that controls the element that you would like to use.

2. Press the SELECT button to select either the inner (smaller) or outer (larger) element function. The dual elements default to the inner element function. The light bars above the SELECT button indicate whether the element is adjusted for the inner or outer element function. One bar will display for the inner element and two bars will display for outer element.

3. Press the + button once to adjust the element temperature to Hi, or the – button once to adjust the element temperature to Lo.

4. Use the – / + buttons to adjust the element temperature settings. The element temperature settings are adjustable at all times.

5. To turn off the element after cooking press the ON/OFF button once.

COOKTOP ELEMENT CONTROLS

To control Warming Zone: (Center)

1. Press the warming zone ON/OFF button. The warming zone indicator light will flash.

2. Press the + button once to adjust the temperature to Hi, or the – button once to adjust the temperature to Lo. Power level sequence is from – Lo, 2, 3, 4, Hi or from + Hi, 4, 3, 2, Lo.

3. Use the – / + buttons to adjust the temperature settings. The temperature settings are adjustable at all times.

4. To turn off the warming zone, press the ON/OFF button once.

NOTE

Use the Warming Zone to keep food warm after it has already been cooked. The warming zone is not meant for cooking food. Attempting to cook uncooked or cold food on the warming zone could result in a foodborne illness.

OVEN CONTROLS

START: Must be pressed to start any cooking or cleaning function.

CLEAR OFF: Press to cancel all oven operations except the clock and timer.

OVEN CONTROLS

CONV.BAKE: Press to select baking with the convection function.

CONV.ROAST: Press to select roasting with the convection function.

BAKE: Press to select the bake function.

BROIL: Press to select the broil function.

WARM: Press this button to keep food warm in the oven.

PROOF: Press to maintain a warm oven for rising yeast-leavened products before baking.

FAVORITES: Press to record, store and recall up to three favorite combinations of temperature and operating mode.

CLOCK, TIMER, AND OTHER OVEN FEATURES

CLOCK: Press before setting the time of day.

COOK TIME: Press this button and then press the number buttons to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

START TIME: Press this button and then press the number buttons to set a delayed start time. The oven will start at the time you set.

TIMER ON/OFF: Press to select or cancel the timer feature.

EASYCLEAN®: Cleans a lightly soiled oven automatically. Refer to “EasyClean” in the Care and Cleaning section of your product manual.

SELF CLEAN: Press to select Self-Cleaning function. See “Using The Self-Cleaning Oven” section in your product manual.

OVEN LIGHT: Press to turn the oven light on or off.

SETTINGS: Use the SETTING button to set Convection Auto Conversion (on some models), Oven Temperature Adjustment, Language, Preheating Alarm Light, Beeper Volume and to switch temperature scale between Fahrenheit and Celsius.

NUMBER PAD: Use to adjust any function requiring specific input such as the clock, timer, or temperature.

WARMING DRAWER SET/OFF: Press to turn the Warming Drawer on and off. Use the number buttons to set the power level. 1 for LOW, 2 for MEDIUM, and 3 for HIGH. Press it again to turn it off.

RANGE DISPLAY

DISPLAY: Shows the time of day, oven temperature, oven cooking or cleaning modes, and the times set for the timer or automatic oven operations.