Power Issues)Reset & Test_ Top Loader
Reset and Test
How to fix
If the unit has lost power and will not power on, perform a reset to attempt to restore power. During this process
visually check the power cord to see if it is frayed or damaged in any way.
1. Unplug the washer or turn off the circuit breaker
2. Allow 10 seconds to pass
3. Plug the washer back in or turn the circuit breaker back on.
After performing the reset, press the power button to see if the unit will power on. If power isn't restored,
proceed through the rest of this guide.
Note: For models all, the power button will not respond for 2 minutes after the cycle has ended. This is done as the capacitor discharges to help protect the control panel. Allow 2 minutes to pass, and press the power button again.