Receive help on your LG product
Receive help on your LG product
Check out the latest information related to this product.
For the most accurate technical information regarding features, specifications, installation and operation of your LG product, please refer to the Owner's Manual and other documents available for this product.
Software upgrades include device drivers and firmware updates only for specific models. Check your owner's manual to determine if your product supports software upgrades.
* SW information
1) Disable the skype due to spec out.
2. Applicable model list
3. Release History
1. Youtube bug patch(OOM issue)
1. DIAL(Discovery And Launch) protocol specification is applied
2. Input function added to Talk on Social Center
3. Password to initialize TV Lock password has changed to 6-digit
4. Pop-up message is added when try to pare with MR13
1. refer to below
1. Disable the skype due to spec out.
1. SmartShare PC SW(DLNA)
[PC requirement for installing LG SmartShareTM]
CPU Minimum spec : Intel Pentium4 2.0G uper / AMD Sempron 2000 uper
Recommended spec : Intel Pentium Dual Core uper / AMD Sempron 64x2 uper
RAM Minimum spec : 1GB uper
Recommended spec : 2GB uper
VGA Minimum spec : Memory 64MB, Resolution 1024*768 uper, Video card 16bit uper
Recommended spec : Memory 128MB, Resolution 1024*768 uper, Video card 16bit uper
HDD 200MB uper
OS Windows XP (Service pack 2 uper), Windows Vista, Windows 7, Windows 8
l Windows Media Player : 11.0.5721.5280 uper
Network 100MB Ethernet, Wireless Lan WLAN(IEEE 802.11g) uper
2. SmartShare PC SW(MediaLink)
To use MediaLink, the PC needs to have PLEX.
With Media Link, you can enjoy contents(Movies/Music) stored on PC on LG Smart TV with convenient UI.
[System requirements for installing PLEX]
- Minimum requirements
PC with at least 1.6 GHz Intel Core Duo Processor and Windows XP SP3, minimum 512 MB
- Recommendations for HD Content transcoding (720p and 1080p)
PC with at least 2.4 GHz Intel Core Duo Processor and Windows XP SP3, minimum 2 GB of
Supports Windows XP, Vista and Windows 7
- Network requirements
ADSL/Cable/Wi-Fi Internet connection for media metadata output and update
Wired network: Ethernet network with 100 Base-T or 1000 Base-T
Wireless network: Recommends uncongested 802.11n & supports media play on wireless
Disconnect the USB dongle first to install the driver.
[Supported Operating System]
- Windows XP
- Windows Vista
- Windows 7
(Windows 7 Starter Edition is not supported.)
[Recommended System Requirements for Pentouch]
- CPU: Dual-Core 2GHz or better
- Memory: 1GB or more
- HDD: 500MB or more
- Display: Graphics card with 1920x1080 (PV490, PZ850 series)
or 1024x768 (Other models) via an RGB or HDMI output port
- Windows 7 is recommend due to its support of multi-touch.
[Application TV Model list]
How do I set the mode to watch 3D image? How to fix - Input modes which support 3D effect are HDMI/RGB-PC/USB/DLNA/Component/DTV signal. ※ 3D effect supporting input mode varies depending on models, so please refer to user guide for 3D input Supporting format as follows. HDMI cable is...
How can I set on/off time? Symptom Do you want to schedule on/off time? You can schedule on/off time in the Settings. ※ To use this feature, it must have correct current time. If the clock is set “Manual”, you need to set time again after turning off the power supply. How to fix Non-S...
I hear noise from TV Symptom Is there noise in the speaker or backside of TV?. How to fix - Noise at the backside of TV ① When you initially use LCD product, it generates a lot of heat so the fan rotates to cool off. And that makes the noise. Even though you turn off the power, it can...
I hear noise in all the channels Symptom When you hear noise while watching TV, you can have a Sound Test to see if the test sound is played clearly. If there is no noise during the Sound Test, it may be due to poor reception on the TV or poor connection of peripheral (set-top box, ga...
Fuse box becomes off Symptom If I connect the TV power cord to the outlet, the fuse box will be off. How to fix 1. Check if the outlet is grounded. If this happens only when you connect through multi-outlet, you must check that multi-outlet. ※ If the multi-outlet is not grounded or if...