Receive help on your LG product
Receive help on your LG product
Check out the latest information related to this product.
For the most accurate technical information regarding features, specifications, installation and operation of your LG product, please refer to the Owner's Manual and other documents available for this product.
Software upgrades include device drivers and firmware updates only for specific models. Check your owner's manual to determine if your product supports software upgrades.
◆ Model:GGC-H20L(SUPER MULTI BLUE BLU-RAY DISC™ REWRITER & HD DVD-ROM™ DRIVE)
◆ Improvement Point
-. Improve Writing Strategy
Refer to the attached file
GGC-H20L Version 1.03 Firmware Update
To update the firmware of the GGC-H20L please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below 1.02.
The drives must be original LG branded drives with the SMB model number GGC-H20L(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC's with Windows Vista and Windows XP
Critical Instructions: (to be followed carefully)
1. Connect the drive at Computer.
2. Download the file GGC-H20L_1.03(EW).ZIP to a folder of your choice.
This download includes this "Read me(ew)" text file, as well as the GGC-H20L_1.03.EXE
program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the updateprocess,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the GGC-H20L_1.03.EXE program
and Firmware upgrade will be automatically started.
When the UPGRADE is complete the screen should indicate "Re Boot" message
and advise you to reboot the system. You will need to reboot your PC
The update will be complete, after you reboot your system.
I tried to disconnect and re-connect the speaker cable Symptom No sound at all How to fix If it is disconnected or not connected properly, it won’t work. Please check the connection. Speaker composition and terminal connection Differently colored bands are attached at the end of the c...
Connection is good How to fix Cable may be worn out or the connection is unstable. If there is a change in your screen as you touch the cable, you need to replace it. When you connect the cable, you need to match color and shape. - For External Input ① Connect cables between OUT termi...
Remote control doesn't work Symptom Remote control doesn’t work. Things to check Its battery may run out or it may be damaged by the fluid. Replace it with the new one. How to fix Check the +,- position of the battery and if the contact part is rusted out.
After I stop CD/DVD, Disc door doesn't open Symptom Even though I press STOP, the Disc door doesn’t open. How to fix - Press STOP button on the remote control or on the product two to three times and press EJECT button. - If you hear motor sound or if the door doesn’t open, contact se...