Receive help on your LG product
Receive help on your LG product
Check out the latest information related to this product.
For the most accurate technical information regarding features, specifications, installation and operation of your LG product, please refer to the Owner's Manual and other documents available for this product.
Software upgrades include device drivers and firmware updates only for specific models. Check your owner's manual to determine if your product supports software upgrades.
※ New firmware (ver. 1.01) for only GSA-2164D(External 16X Super multi DVD Writer)
◆ Improvement Point
- Improvement of recording fail for 8cm CD-R
Refer to the attached file
GSA-2164D Version 1.01 Firmware Update
To update the firmware of the GSA-2164D please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below 1.00.
The drives must be original LG branded drives with the DVD Writer
model number GSA-2164D(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC's with Windows XP, Windows 2000.
1. Connect the drive at USB Port.
2. Download the file GSA-2164D101(EW).ZIP to a folder of your choice.
This download includes this "Read me(ew)" text file, as well as the GSA2164D101.EXE
program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the GSA2164D101.EXE program
and click the "Update" button. Once the update is complete,
you will see "Update was Complete" and advise you to reboot the system.
※ You will need to reboot your PC
The update will be complete, after you reboot your system.
Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Connection is good How to fix Cable may be worn out or the connection is unstable. If there is a change in your screen as you touch the cable, you need to replace it. When you connect the cable, you need to match color and shape. - For External Input ① Connect cables between OUT termi...
I tried to disconnect and re-connect the speaker cable Symptom No sound at all How to fix If it is disconnected or not connected properly, it won’t work. Please check the connection. Speaker composition and terminal connection Differently colored bands are attached at the end of the c...
Blueray Disc doesn't work Symptom Bluray CD doesn’t play. Bluray Disc plays only with Bluray product. (It can’t be played with ordinary DVD or audio.) How to fix Comparison between Blu-ray/DVD Bluray is more developed than DVD and provides more perfect digital video and both of them h...
I see ERROR text Cause If noise signal due to crumpled tape or foreign objects is input, it may occur. How to fix ①For wet type tape, add 6 drops of alcohol and insert the tape. Play 20sec. → Forward 10sec. → Rewind 10sec. Do not press Stop button while doing this. Clean it until audi...