Receive help on your LG product
Receive help on your LG product
Check out the latest information related to this product.
For the most accurate technical information regarding features, specifications, installation and operation of your LG product, please refer to the Owner's Manual and other documents available for this product.
Software upgrades include device drivers and firmware updates only for specific models. Check your owner's manual to determine if your product supports software upgrades.
※ New firmware (ver. 1.02) for only GSA-H54L(Internal 18X Super multi DVD Writer)
◆ Improvement Point
-. Improve writing quality for DVD+R(CMC MAG M02 16X)
Refer to the attached file
GSA-H54L Version 1.02 Firmware Update
To update the firmware of the GSA-H54L please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below 1.01.
The drives must be original LG branded drives with the DVD Writer
model number GSA-H54L(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC's with Windows Vista,
Windows XP and Windows 2000.
1. Connect the drive as "master" by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the "master" position.
2. Download the file GSA-H54L_1.02.ZIP to a folder of your choice.
This download includes this "Read me(ew)" text file, as well as the GSA-H54L_1.02.EXE
program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the GSA-H54L_1.02.EXE program
and Firmware upgrade will be automatically started.
When the UPGRADE is complete the screen should indicate "ReBoot" message
and advise you to reboot the system. You will need to reboot your PC
The update will be complete, after you reboot your system.
Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Connection is good How to fix Cable may be worn out or the connection is unstable. If there is a change in your screen as you touch the cable, you need to replace it. When you connect the cable, you need to match color and shape. - For External Input ① Connect cables between OUT termi...
I tried to disconnect and re-connect the speaker cable Symptom No sound at all How to fix If it is disconnected or not connected properly, it won’t work. Please check the connection. Speaker composition and terminal connection Differently colored bands are attached at the end of the c...
Wrong current time Cause The existing analogue broadcasting equipment are worn out and so the clock may show the wrong time. How to fix You must set manual. And for blackout, the product may be initialized and you need to reset the clock.
I tried using Head Cleaner for tape Cause If noise signal due to crumpled tape or foreign objects is input, it may occur. How to fix ①For wet type tape, add 6 drops of alcohol and insert the tape. Play 20sec. → Forward 10sec. → Rewind 10sec. Do not press Stop button while doing this. ...