L2-C486BA0

Help Library

Topic

  • Document Contents
    Troubleshooting
    [LG Air Conditioner] Guide to Error Codes
    If the LED lamp blinks or an error code [CH 00] appears on the display, yourunit requires inspection.The error may be a temporary one caused by power instability or other electricalfactors.Try this--------Perform a power cycle (reset)➔ Unpl...
  • Document Contents
    Repair
    [LG Air Conditioner Cleaning] How to use robot cleaning function
    The robot cleaning function automatically cleans dusts from the filter.The function removes dusts from the filter, which interrupt air intake, toimprove efficiency of the product.※ The function is applicable to certain models only; No clean...
  • Document Contents
    Repair
    [LG Air Conditioner Error Code] HI is shown on the display
    Is message [HI] displayed on the cable remote control?Causes and Symptoms------------------- * Indoor temperature is 35.5℃(95.5°F) or higher.Try this--------Is message [HI] displayed on the cable remote control?➔ Use the product as it is.Wh...
  • Document Contents
    Repair
    [LG Air Conditioner Heating] I think heating becomes weaker
    Try this--------If there is no hot wind from the product1. If the target temperature is set lower than or equal to the current indoortemperature, then the product concludes that the user is satisfied with thecurrent indoor temperature and t...
  • Document Contents
    Repair
    [LG Air Conditioner Heating][Buried Duct] Heating is weak. Heating is failed
    Causes and Symptoms------------------- * Filter is clogged by lots of dusts. * The target temperature is set low. * The opening/closing circular fan at the wind outlet vent is adjusted incorrectly.Try this--------Is the filter cleaned?➔ If ...
  • Document Contents
    Repair
    [LG Air Conditioner Air Purification] Air purification function is failed
    Causes and Symptoms------------------- * If you hear the quick buzzer sounds 7 times, it means that the filter cover is not assembled properly. * Air purification function is not installed.Try this--------As you hear the quick beeping sound...
See more