SUBJECT : INLET HOSE INSTALLATION
■ Dishwasher consist of an inlet valve combined with a hose.
■ This dishwasher may be fed with either hot or cold water. If the water can not be maintained below 65ºC, the
dishwasher must be connected to cold water.
■ When connecting, you may use sealant tape or sealing compound to avoid water leaks.
■ Make sure that the line is not kinked or sharply bent.
■ Periodically check the inlet hose for leaks and wear, and replace the hose if necessary.
■ Water supply pressure must be between 0.05~0.6MPa. If the water supply pressure is more than 0.6MPa,
a pressure reducing valve must be installed.
How to Setup
■ Connect the inlet hose to the Water Tap
■ Make sure that the Inlet hose is properly fitted. Check for leaks on the connection between inlet hose and water tap.