※ New firmware (ver. 1.04) for only GCE-8527B(52X CD-RW Drive)
◆ Improvement Point
-. Automatically retry, if the Tray isn't closed normally
Refer to the attached file
GCE-8527B Version 1.04 Firmware Update
To update the firmware of the GCE-8527B please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below 1.03.
The drives must be original LG branded drives with the CD Writer
model number GCE-8527B(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC's with Windows XP, Windows 2000,
Windows Millennium Edition(ME), or Windows 98.
1. Connect the drive as "master" by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the "master" position.
2. Download the file GCE-8527B104(EW).ZIP to a folder of your choice.
This download includes this "Read me(ew)" text file, as well as
the GCE8527B104.EXE program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update
process, thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the GCE8527B104.EXE program.
Firmware upgrade will be automatically started.
※When the UPGRADE is complete the 'WINDOWS FLASH TOOL' should indicate
"Restarting Drive...." and "NOTE" pop-up
The update will be complete, after you reboot your system.
Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.