為令您有更佳網站服務體驗, 請使用另一瀏覽器或更新到更新版本的 internet Explorer (IE10 或以上)
類別 | ~ 50 | ~ 500 | ~ 1000 | ~ 2000 | ~ 5000 |
---|---|---|---|---|---|
伺服器 | 單一伺服器 | 單一伺服器 | 單一伺服器 | 伺服器叢集 ﹑數據庫 ( 2 個伺服器) | 伺服器叢集 ﹑數據庫 ( 5 個伺服器) |
建議操作系統 | Windows 7 SP1 Windows 8.1 |
Windows 7 SP1 Windows 8.1 |
Windows 7 SP1 Windows 8.1 Windows Server 2008 R2 SP1 |
Windows Server 2008 R2 SP1 Windows Server 2012 |
windows Server 2008 R2 SP1 Windows Server 2012 |
中央處理器 (CPU) | Intel i5 (第 3 代或以上) | Intel i7 (第 3 代或以上) | Intel Xeon E5-2600 | Intel Xeon E5-4600 | Intel Xeon E7-4800 |
記憶體 | 2GB 或以上 | 4GB 或以上 | 8GB 或以上 | 16GB 或以上 | 32GB 或以上 |
硬盤 | 100GB | 1TB | 2TB (RAID 1) | 4TB (RAID 1+0 or RAID 6) | 8TB (RAID 1+0 or RAID 6) |
網絡頻寬 | 10Mbps | 100Mbps | 100Mbps | 1Gbps | 1Gbps |
類別 | 伺服器 |
---|---|
~ 50 | 單一伺服器 |
~ 500 | 單一伺服器 |
~ 1000 | 單一伺服器 |
~ 2000 | 伺服器叢集 ﹑數據庫 ( 2 個伺服器) |
~ 5000 | 伺服器叢集 ﹑數據庫 ( 5 個伺服器) |
類別 | 建議操作系統 |
~ 50 | Windows 7 SP1 Windows 8.1 |
~ 500 | Windows 7 SP1 Windows 8.1 |
~ 1000 | Windows 7 SP1 Windows 8.1 Windows Server 2008 R2 SP1 |
~ 2000 | Windows Server 2008 R2 SP1 Windows Server 2012 |
~ 5000 | windows Server 2008 R2 SP1 Windows Server 2012 |
類別 | 中央處理器 (CPU) |
~ 50 | Intel i5 (第 3 代或以上) |
~ 500 | Intel i7 (第 3 代或以上) |
~ 1000 | Intel Xeon E5-2600 |
~ 2000 | Intel Xeon E5-4600 |
~ 5000 | Intel Xeon E7-4800 |
類別 | 記憶體 |
~ 50 | 2GB 或以上 |
~ 500 | 4GB 或以上 |
~ 1000 | 8GB 或以上 |
~ 2000 | 16GB 或以上 |
~ 5000 | 32GB 或以上 |
類別 | 硬盤 |
~ 50 | 100GB |
~ 500 | 1TB |
~ 1000 | 2TB (RAID 1) |
~ 2000 | 4TB (RAID 1+0 or RAID 6) |
~ 5000 | 8TB (RAID 1+0 or RAID 6) |
類別 | 網絡頻寬 |
~ 50 | 10Mbps |
~ 500 | 100Mbps |
~ 1000 | 100Mbps |
~ 2000 | 1Gbps |
~ 5000 | 1Gbps |
- 網絡登錄的RSA加密
* 2016 年起將實施「 https」
* 備註:系統配置可能因網路狀態、內容大小及發佈頻率而有所不同。
- 內容儲存配置
- 使用PostgreSQL 數據庫實時備份
1. 將 “cluster.use” 値設為 “true”。
2. 將 “Server1’s “cluster.target value” 設為伺服器 2 的連結。
3. 將 “Server2’s “cluster.target value” 設為伺服器 3 的連結。
4. 將 “Server3’s “cluster.target value” 設為伺服器 1 的連結。
5. 重啟伺服器。
* 資料庫及儲存資料夾應安裝於不同的電腦。