Skontaktuj się z nami

Wsparcie produktowe LG
Uzyskaj wsparcie dla Twojego produktu
Uzyskaj wsparcie dla Twojego produktu
Sprawdź najnowsze informacje dotyczące tego produktu.
Bardziej szczegółowe informacje techniczne dotyczące specyfikacji, opisu funkcji, instalacji oraz sposobu korzystania z urządzenia znajdziesz w instrukcji obsługi oraz innych dokumentach dostępnych dla tego produktu.
Aktualizacja oprogramowania oraz sterowników możliwa jest jedynie dla wybranych modeli. Sprawdź instrukcję obsługi swojego urządzenia i upewnij się czy instalacja aktualizacji jest możliwa na Twoim urządzeniu.
◆ Model:CH08LS10
◆ Ver:2.00
◆ Improvement Point
-.Support Windows 7
-. INSTRUCIONS
CH08LS10 Version 2.00 Firmware Update
To update the firmware of the CH08LS10 please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below 2.00
The drives must be original LG branded drives with the SMB model number CH08LS10(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC's with Windows 7, Vista and Windows XP
1. Connect the drive at Computer.
2. Download the file CH08LS10_200(EW).ZIP to a folder of your choice.
This download includes this "Read me(ew)" text file, as well as the CH08LS10_200.EXE
program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the updateprocess,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the CH08LS10_200.EXE program
and Firmware upgrade will be automatically started.
When the UPGRADE is complete the screen should indicate "Re Boot" message
and advise you to reboot the system. You will need to reboot your PC
The update will be complete, after you reboot your system.
-. WARNING:
Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Skontaktuj się z nami