Help library

  Shaking and vibration during cycle

If your product is not levelled then a little bit of vibration may occur during drying.

Although the product would have been levelled during its installation, it may become unlevelled and generate noise and vibration if you move the product or changes its direction.

1) How to check the horizontal level

 
- Check whether there is any rocking motion when you hold the diagonal ends on top of the product and try and move it.
(Try to see if you can shake it by holding the front right corner and the rear left corner, and then again by holding the front left corner and right rear corner.)

2) How to adjust the horizontal level

 
- If you find it's not level, it can be adjusted using a spanner.

 
- If you turn the leg clockwise, the product is raised, and if you turn in counter-clockwise, the product is lowered.

 
- After the adjustment, check whether there is any rocking when you hold the diagonal ends of the top of the product and shake it.

※ You can find more information in the user manual.