Front camera lens options

When using the front camera lens, the quick menus on the left side of the screen are:

• Flash - Sets the flash to (On).

• Swap camera - Swaps between the rear camera lens and front camera lens.

• Settings - Opens the camera settings menu.

The following options are available to optimize your shot when you tap the Settings icon on the viewfinder screen for the front camera lens:

• Cheese shutter : Sets the shutter to activate by voice command. Choose On or Off.

• Brightness : Defines and controls the amount of light entering the lens. Use the slider bar to increase or decrease image brightness.

• Image size : Defines the resolution for the photo as VGA 640x480 (4:3).

• White balance : Defines the ambient lighting to improve the color qualities of the photo under different lighting conditions. Choose from Auto, Incandescent, Sunny, Fluorescent, and Cloudy.

• Color effect : Applies artistic effects to pictures. Choose from None, Mono, Sepia, and Negative.

• Timer : Sets a delay timer for the camera. Choose from Off, 3 sec, 5 sec, and 10 sec.

• Save as flipped : Sets the camera to save the image in the orientation it was taken (landscape or portrait). Choose Off or On.

• Geotagging : Sets the camera to add location information to the picture. Choose Off or On.

• Shutter sound : Sets the shutter sound for the camera. Choose from Tone 1, Tone 2, Tone 3, Tone 4, and Off.

• Volume key : Sets how to use the Volume Key. Choose Capture or Zoom.

• Storage : Sets where your pictures are saved. Choose SD card or Internal storage.

• Help : Tap to open the Camera help guide.

• Reset : Tap to reset to the default settings.