Rear camera lens options

When using the rear camera lens, the quick menus on the left side of the screen are:

• Flash - Sets the flash to (On), (Off), or . The flash icon will be displayed on the viewfinder.

• Swap camera - Swaps between the rear camera lens and front camera lens.

• Shot mode - Defines how the shot will be taken. Choose from Normal, Dynamic tone (HDR), Panorama, Continuous shot, Time catch shot, and Sports. Tap the icon in the lower-left corner of the Shot mode screen to view definitions for each of these modes.

• Settings - Opens the camera settings menu.

The following options are available to optimize your shot when you tap the Settings icon on the viewfinder screen for the rear camera lens:

• Cheese shutter : Activates the camera shutter by voice command. Choose On or Off. A help guide for Cheese shutter is displayed when you select On.

• Brightness : Defines and controls of the amount of light entering the lens. Slide the brightness indicator along the bar toward “-” for a lower brightness image or toward “+” for a higher brightness image.

• Focus : Defines the focus of the shot.

  • Auto: Sets the camera to focus automatically on the object you tap on the screen before you tap the Capture button .

  • Manual: Sets the camera to focus manually by sliding the distance indicator along the bar, before you tap the Capture button .

  • Face tracking: Sets the camera to automatically detect and focus on human faces.

• Image size : Defines the resolution for the photo. Choose from 5M 2560x1920 (4:3), W3M 2304x1296 (16:9) and 1M 1280x960 (4:3).

  NOTE

  The default resolution is W3M 2304x1296 (16:9).

• ISO : Defines and controls the camera’s sensitivity to light. Choose from Auto, 800, 400, 200, and 100.

• White balance : Defines the ambient lighting to improve the color qualities of the photo under different lighting conditions. Choose from Auto, Incandescent, Sunny, Fluorescent, and Cloudy.

• Color effect : Applies artistic effects to pictures. Choose from None, Mono, Sepia, and Negative.

• Timer : Sets a timer to delay taking the picture. Choose from Off, 3 sec, 5 sec, and 10 sec.

• Geotagging : Sets the camera to save the location information for the pictures you take. Choose Off or On.

• Shutter sound : Sets the shutter sound. Choose from Tone 1, Tone 2, Tone 3, Tone 4, and Off.

• Volume key : Sets how to use the Volume Key. Choose Capture or Zoom.

• Storage : Sets where your pictures are saved. Choose SD card or Internal storage.

• Help : Tap to open the Camera help guide.

• Reset : Tap to reset to the default settings.