Rear video camera lens options

When using the rear camera lens, the quick menus on the left side of the screen are:

• Flash - Sets the flash to (On), (Off), or (Auto). The flash icon will be displayed on the viewfinder.

• Swap camera - Swaps between the rear camera lens and front camera lens.

• Recording mode - Defines how the video will be recorded. Choose Normal or Live effect. Tap the icon in the lower-left corner of the Recording mode screen to view definitions for each of these modes.

• Settings - Opens the video camera settings menu.

The following options are available to optimize your video recording when you tap the Settings icon on the viewfinder screen:

• Video size : Sets the resolution (video size) for the video. Choose from FHD 1920x1080 (30fps), HD 1280x720, QVGA 320x240 (MMS), and QCIF 176x144 (MMS).

  NOTE

  The default resolution is FHD 1920x1080 (30fps).

• Brightness : Defines and controls of the amount of light entering the lens. Slide the brightness indicator along the bar toward “-” for a lower brightness image or toward “+” for a higher brightness image.

• White balance : Defines the ambient lighting to improve the color qualities of the video under different lighting conditions. Choose from Auto, Incandescent, Sunny, Florescent, and Cloudy.

• Color effect : Applies artistic effects to videos. Choose from None, Mono, Sepia, and Negative.

• Geotagging : Sets the camcorder to add location information to the video. This is ideal for geotagging purposes. Choose Off or On.

• Volume key : Set how to use the Volume Key. Choose Record or Zoom.

• Storage : Sets where your pictures are saved. Choose SD card or Internal storage.

• Help : Tap to open the Camera help guide.

• Reset : Tap to reset to the default settings.