Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help Library

Find helpful information about your LG product

[LG Air Conditioner Installation][Portable] I want to learn how to install an air conditioner. (Models launched in 2019)

Repair

A portable air conditioner is installed by customers themselves.

Try this

1. Prepare installation tools.

Cross headed screw driver, ruler, knife, tape, 3mm(0.11in) electrical motor drill

2. Measuring the internal length of window and assembling the installation board.

Measure the length of window and assemble the installation board according to the length shown in the user manual.
If the window is 58cm (22.83in) or shorter, you should cut the basic installation plate.
If the window is 153cm (60.23in) or longer, you need to purchase an extended installation plate. (LG Electronics Service Center)

Display examples of window internal length measurement and extension mounting plate assembly
Display examples of window internal length measurement and extension mounting plate assembly List
Installation board ⓐ Basic installation board (58cm) (22.83in) ⓑ Extended installation board (40cm) (15.74in) ⓒ Extended installation board (58cm) (22.83in) Example of installation board assembly
Height of the window chassis
58cm(22.83in)
59.5cm(23.42in)~96.5cm(37.99in) ⓐⓑ
99cm(38.97in)~114.5cm(45.07in) ⓐⓒ
117cm(46.06in)~153cm(60.23in) ⓐⓒⓑ

3. Install the fixing clips.

Insert the fixing clip to the both tips of the installation board.

Image of installing a fixed clip

4. After adjusting the length of installation board, install it in the window edge.

5. Fixing the installation board.

Insert the installation board to the window edge and fix the four locations on the both sides of installation board with screws.

Image securing the mounting plate with screws

6. Combine the hose and the installation board.

Insert the hose to the groove of the circular outlet at the tip of the hose and the groove of the instillation board and turn it CCW to combine them.

Image that connects exhaust hose and installation plate.

7. Insulate the gap of the installation board.

Insulate the gap by blocking the both sides of installation board and the window gap with insulation material.

Image that blocks gaps in the installation plate with insulation.

8. Fix the window fixing bracket.

To make sure the window opens outside, install a window fixing bracket.

Image of securing windows with fixing brackets.

9. Insulate the window gap.

After cutting the insulation material in the window gap in accordance with the window length, insert it into the window gap.

an image of insulating a gap in a window

10. Arrange the hose length.

Image of installation at regular intervals from the wall by arranging hose lengths

This guide was created for all models, so the images or content may be different from your product.

*Required question