Skip to Contents
Close

Help Library

Find help information for your LG product

Learn about product installation, maintenance, and troubleshooting using our search options.

Electric Range: “F-9” error code

  • Noises
  • Others
  • Troubleshooting
  • Cooktops, Wall Ovens & Ranges

 1.

 Should the LG electric range be beeping alerting customer to some malfunction, seek error code.

 2.

 If the Control Panel Display lights up error code “F-9” it means oven got too hot!

 3.

 Have customer press the Clear/Off button to terminate the beeping alarm.

 4.

 Try to reset the unit by either unplugging the range or switching circuit breaker to “off” position.

 5.

 Advise customer to leave it “as is” for 3 to 5 minutes then re-plug or switch breaker back “on”.

 6.

 Either the range has been reset and will operate normally moving forward or;

7.

 …if the “F-9” error code persists, a service technician will need be dispatched.

 

 

Resetting the range once is executed in the hope of demagnetizing electronic circuitry that could have inadvertently generated this error code. However, if the error code persists, then we must conclude a mechanical or electronic defect with the unit.





Possible causes for oven not heating can either be a short-circuited element, a defective relay printed circuit board or defective relay connector. Other than dispatching an authorized service technician to repair the range, there is no other possible troubleshooting.


You can schedule in-home service by accessing following link: https://www.lg.com/ca_en/support/repair-service/schedule-repair


If the range is out of warranty you can take advantage of LG OnePrice repair program by accessing following link:


https://lgoneprice.ca/


or contacting LG Call Centre at 1.888.542.2623 to obtain further information.

 

 

Article Feedback

Q1. Overall, how satisfied were you with the usefulness of this information?
Q1-1. Why were you dissatisfied withthe usefulness of this information?

Characters left : 500 / 500