Check if the cover of the washing machine is open.
If there is a dE error and the washing machine cover is open, your machine will not operate normally.
When you start washing, your machine will not supply water but slowly spin the tub to weigh your laundry.
This is intended to ensure efficiency of washing that meets the load of laundry.
New models will operate for about 40 seconds without water supply to weigh the laundry when you power on and press Start.
Once the laundry weight is detected, the water supply turns on. This is a normal operation, so you can use it with an easy mind.
Laundry Weighing?
Laundry weighing (sensing the weight of laundry) runs when you press the Start button.
Your washing machine then senses the weight of your laundry by spinning the tub for about 40 seconds.
Older models that came without this weighing function dispense water immediately.
So, you may be surprised by newer models and their delayed water supply.
Pressing the Start button for weighing creates a clicking noise when the tub and the motor are engaged.
Your washing machine then senses the weight of your laundry by spinning the tub for about 40 seconds.
Older models that came without this weighing function dispense water immediately.
So, you may be surprised by newer models and their delayed water supply.
Pressing the Start button for weighing creates a clicking noise when the tub and the motor are engaged.
This guide was created for all models, so the images or content may be different from your product.
