In case that you have to turn on the product without a remote controller, you can use the forced operation
switch to do so.
But forced operation does not allow you to use the detailed functions of the product, so you must purchase a
remote controller suitable for the product.
In addition, if the model supports ThinQ, you can first register it with ThinQ and turn on/off the power in
the function menu.
Forced operation switch location
Location of forced operation switch varies depending on the model.
Accurate product function information can be checked through the product model name, and detailed
consultation is available through an LG Electronics Customer Center.
➔ LED type [Product type with a display window at the front]
Use your hands to open the louver at the wind outlet vent.
On the right side, there is the forced operation switch.
➔ LED lamp type [Product type with no display window at the front]
Open the front panel.
On the right side, there is the forced operation switch.
Try this
Forced operation
Press the forced operation switch to start [Forced Operation].
If you long press it, it will operate in test operation mode lasting for about 18 minutes until the product
is stopped.
But forced operation does not allow you to use the detailed functions of the product, so you must purchase a
remote controller suitable for the product.
This guide was created for all models, so the images or content may be different from your product.
