Skip to Contents Skip to Accessibility Help
Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help library

Find helpful information about your LG product

[LG Water Purifier] Hot water is not dispensed post-repair or installation

Troubleshooting Water Purifiers 09/04/2024

Once the product is repaired, flow rate detection will function to enable precise temperature control.
However, if ambient water is dispensed instead of hot water post-repair or installation, it might suggest a failure in flow rate detection.
In case of such a failure, even if hot water is selected, ambient water will be dispensed continuously without stopping.

Try this

Dispense hot water into a container with a volume of at least 2L and wait until the hot water stops dispensing automatically.

PuriCare Slim Hot/Cold Water Purifier: Dispense hot water into a container with a volume of at least 2L.

Once flow rate detection is completed, the purifier will stop dispensing automatically.
Flow rate detection may take up to 10 minutes.
If flow rate detection is not initiated (i.e. when no hot water is dispensed), please disconnect and reconnect the power plug.
Then, select hot water and press the Dispense button to start flow rate detection.

This guide was created for all models, so the images or content may be different from your product.

*Required question
RETURN TO RESULTS

Contact

Telephone
Email
Customer Feedback
Your Voice to The President
LG Support
Need information? Got a question? We can help.
Whether you need to register your product, communicate with an LG Support Representative, or obtain repair service. Finding answers and information is easy with LG online service and support. Owner’s Manuals, requesting a repair, software updates and warranty information are all just a click away.