Execute this function when a digital indoor/outdoor antenna, a public antenna in an apartment house, or a cable company's antenna is connected directly to the rear of the TV.
Execute this function when carrying out the initial setting of the TV, after moving it, or if the cable company's channels have been changed.
When you watch broadcasting by connecting through a set-top box, change the external input mode to watch regardless of the automatic channel setting function.
Try this
[2022 WebOS22] Carrying out automatic channel setting
1. After turning on the TV, press the [Settings] button on the remote control.
From [Settings], select [All Settings].
2. Select [General].
3. Select [Channels].
4. Select [Channel Tunning].
5. Select the connected antenna and select [Start].
6. When searching for channels is completed, select [End].
[2019 WebOS4.5] Carrying out automatic channel setting
1. After turning on the TV, press the [Settings] button on the remote control.
From [Settings], select [All Settings].
2. Select [Channels].
3. Select [Channel Tunning].
4. Select [Auto Tunning].
5. Select [Start].
6. When searching for channels is completed, select [End].
[2021 WebOS6.0]
Press the button on the remote control and select [All Settings] → [General] → [Channels] → [Channel Tunning] → [Start] → [End]
[2020 WebOS5.0]
Press the button on the remote control and select [All Settings] → [Channels] → [Channel Tunning] → [Auto Tunning] → [Start] → [End]
[2018 WebOS4.0]
Press the button on the remote control and select [All Settings] → [Channels] → [Channel Tunning] → [Auto Tunning] → [Start] → [End]
[2017 WebOS3.5]
Press the button on the remote control and select [All Settings] → [Channels] → [Channel Tunning] → [Auto Tunning] → [Start] → [End]
This guide was created for all models, so the images or content may be different from your product.
