Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help Library

Find helpful information about your LG product

[LG TV Sync] Sound reverberates when it is put through the internal and the external speakers simultaneously

Troubleshooting

•  Possible causes of echoing sound are many.

If the Digital Sound output is set to [Auto], then there will be a delay in sending outputs to the external speaker compared to the TV speaker due to voice signal output processing, and thus there may be echoing sounds.

Image with Digital Sound Output set to Auto

•  If [Use Multiple Speakers] is enabled in the audio settings, the sound may be echoed or out of sync due to sound interference.

Image of Use Multiple Speakers set to listen to sound through external speakers and TV speakers at the same time
Appearance of the selection menus of Use Multiple Speakers

➔ This may be reduced by enabling the AV sync on the sound bar.

➔ If the sound echoes, set [Sound]→[Sound Out] to a single speaker.

Try this

To change Digital Audio Out to PCM

• [2021 WebOS6.0] or later: Select Settings ( Setting button ) on your remote control and select [All Settings] → [Sound] → [Advanced Settings] → [Digital Sound Output] → [PCM].

• [2020 WebOS5.0] or earlier: Select Settings ( Setting button ) on your remote control and select [All Settings] → [Sound] → [Additional Settings] → [Digital Sound Output] → [PCM].


➔ Setting in [2021 WebOS6.0] or later

1. After turning on the TV, press the [Settings] button on the remote control.
From [Settings], select [All Settings].

Image that enters all settings by pressing the setting button on the remote control

2. Select [Sound] → [Advanced Settings].

Image of selecting Advanced Settings in Sound

3. Set [Digital Sound Output] to [PCM].

Image of selecting digital sound output
Image of selecting digital sound output as PCM

To change the output speaker when the sound echoes

※ Check the connection types to the TV and the audio devices beforehand.

E.g. optical cable/optical connection, HDMI cable connection, and Bluetooth connection

• [2022 WebOS22] [2021 WebOS6.0]: Select Settings ( Setting button ) → [All Settings] → [Sound] → [Sound Out].

• [2020 WebOS5.0] or earlier: Select TV Settings ( Setting button ) → [All Settings] → [Sound] → [Sound Out].


➔ To set from [2022 WebOS 22] [2021 WebOS 6.0]

1. After turning on the TV, press the [Settings] button on the remote control.
From [Settings], select [All Settings].

Image that enters all settings by pressing the setting button on the remote control

2. Select [Sound] → [Sound Out].

Image of selecting sound out during setup

3. From [Sound Out], change the speaker and the sound as you want.

image of changing sound out setting speaker

➔ [2020 WebOS5.0] or earlier

1. After turning on the TV, press the [Settings] button on the remote control.
From [Settings], select [All Settings].

Image that enters all settings by pressing the setting button on the remote control

2. Select [Sound] → [Sound Out].

Image of selecting Sound Out from the Sound menu

3. Select the right speaker for the type of connection and check the sound.

Sound Out Settings Images to choose while changing speakers

If the sound is slightly out of sync, use the AV Sync on the sound bar.

1. When the sound echoes, press the AV Sync on the sound bar remote control.

Image of selecting the AV sync button on the soundbar remote control

2. Check the sync rate displayed on the sound bar and adjust the reverberation by pressing the left/right arrow on the remote control.

Image of adjusting the sound sync with the remote control

3. You can adjust it in the LG SOUNDBAR App.

This guide was created for all models, so the images or content may be different from your product.

*Required question