Water leakage may occur if the filter is not correctly connected after being replaced.
Try this
Replacing the water purifier filter.
1. Close the feed water supply valve.
2. Press the Dispense button to remove remaining water inside the purifier.
3. Unplug the power plug.
4. Hold the bottom of the filter cover and pull the cover forward.
5. Hold the bottom part of the filter, lift it up and turn it counterclockwise to remove it.
6. Turn the new filter clockwise to assemble it.
Filter replacement cycle
Filter B on the right: every 12 months
7. Close the filter cover using both hands.
8. Connect the power plug and open the feed water supply valve.
Plug in the power plug and open the feed water supply valve.
Dispense 1000ml of purified water 15 times before resuming normal use of the purifier.
(For models with the [Cont.] button, press the button to dispense water for 3 minutes.
Repeat this process four times before resuming normal usage.)
During the process of flushing, cloudy water containing micro air bubbles may be observed.
The water may look gray after passing through activated charcoal or activated charcoal powder in the filter.
Water may leak if the filter is not correctly connected after being replaced.
This guide was created for all models, so the images or content may be different from your product.
