The water purifier is equipped with a sensor that detects the flow rate of water.
→ Up to 5-10% discrepancy between the chosen volume and dispensed volume of water exist because the flow rate sensor is affected by factors related to the installation environment, such as water pressure.
Volume selection
→ The volume of hot, cold or ambient water can be chosen between 120ml, 500ml, and 1000ml.
After choosing one of Hot, Ambient or Cold water, select the desired volume, then press the Dispense button to obtain the desired temperature and amount of water.
Continuous dispense
→ This feature is used to continuously dispense cold or ambient water for up to 3 minutes.
(There is no continuous hot water dispense function for safety reasons.)
If you press other buttons while continuous dispense is in operation, water will stop being dispensed.
This guide was created for all models, so the images or content may be different from your product.