Help Library: Help Library: LG Dish Washer - Softener

LG Dish Washer - Softener

Troubleshooting Dishwashers 25/06/2024

Facebook Share Twitter Share EMAIL

■ Dishwasher Softener Operation

※ How to set up a water softener.

1) Contact your water provider to check water hardness.

Check with a tester enclosed in a manual.(Place the tester in water for 30 seconds. Take it out, shake it. Check its color after 1 minute.)

2) Read setting value corresponding to a number of color changes (hardness of water) on table.

3) To change the settings, please press Power and Half Load at the same time. Press the Half Load button to adjust hardness setting.

Press Delay Start button to save the setting value. (A dishwasher is initially set a [H00].)

4) To refill salt, please first remove a lower rack and open a cap of the water softener located on the left side of door.

(If salt is refilled for the first time, insert 1.5kg of salt with 1 litter of water. Please use funnel when filling salt, and clean salt around water softener.)

*Required question

Article Feedback Article Feedback

1. Was this information helpful?*

Please fill out the required field.

YES NO

1-1 Overall, how satisfied were you with the usefulness of this information?*

Please fill out the required field.

1-1-1 How can we improve the information?*

Please fill out the required field.

Difficult to read Instructions were not clear Information does not apply to my product Video would be helpful Broken link(s)

2. How would you improve the information?*

Please fill out the required field.

Characters left : 500 / 500

Submit

Thank you for your feedback!