Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help Library

Find helpful information about your LG product

Countertop microwave oven installation

Installation

Installation Tips : Proper installation of a countertop microwave oven

Precautions for installing as well as caring & cleaning for countertop microwave oven.

Try this

  • Install on a firm, solid and even surface.
  • Check the product’s location. If the unit is placed over the sink or on any steel surface, noise level risks being very loud.
  • Installation in an open area is recommended for ventilation. However that proves unfeasible, wherever it will wind up, make sure to keep a minimum clearance distance of 20 centimeters from the top and 10 centimeters from left, right, and back of the product to prevent physical deformation and/or appliance malfunction.

    installation clearance

  • As the oven can interfere with TVs or radios risking causing unstable video or noise, keep distance of 4 meters between the microwave over and other radio frequency devices.

    ※ Do not install in an enclosed cabinet.

  • Avoid placing heavy objects or lace-decorated cover on top of microwave oven. It may result in bodily injury should objects fall or unit risks malfunction due to overheating.
  • Plug in the power cord to a grounded 110V power socket. As the microwave oven requires most of an AC line’s power avoid using a power bar especially where other small appliances may running off just to prevent tripping circuit breaker or blowing fuses.
Before Use
  • Do not use an oven with a rice cooker, integrated washer dryer, or a dishwasher at the same time.
  • Circuit breaker may trip due to power shortage
  • Maintain a distance of 4 meters to avoid poor television reception and radio interference which can occur when an oven is close to a TV or a radio.
Internet installation instructions and advice

Setting the Clock Mode and Time of Day

  1. Open the oven door. Press + repeatedly to toggle between the 24-hour (24H) and 12-hour (12H) clock mode.
  2. Press Enter to set the clock mode.
  3. To set the time of day, press + or – to select the desired hour.
  4. Press Enter to set the hour.
  5. Press + or – to select the desired minutes.
  6. Press Enter to finish setting the time of day
*Required question