If you add too much detergent, it may cause too much foam for it to rinse thoroughly.
If you use liquid detergent or a natural detergent, it may not rinse well due to the high amount of foam produced compared to a specific front load washer detergent.
If you increase the number of rinses, you can effectively remove the foam.
Try this
If you are particularly concerned about having a lot of leftover foam, it is recommended that you use a fabric softener.
Fabric softener ingredients have the effect of neutralizing foam.
How to clean the detergent dispenser
Detergent dispensers should be cleaned regularly as the water supply may be blocked by detergent residue, etc.
If not, water may overflow or leak.
Separate and clean each part of the detergent dispenser.
Clean using a soft brush and cloth with lukewarm water.
1. Pull out while pressing the fabric softener cap lightly.
2. Clean the detergent dispenser and the inside of the slot into which the detergent dispenser is inserted using a toothbrush, and then reinsert the detergent dispenser.
3. Cleaning the detergent dispenser about once a week will keep it clean.
A model with a frontal pull-out detergent dispenser
A model with detergent dispensers on top
This guide was created for all models, so the images or content may be different from your product.
