On the rear of the roboking, there is the main power switch.
So, turn on the main power first and then touch the [Start/Stop] button at the top of the roboking or press the [Start] button on the remote control.
If dormant for a long time or the battery is completely discharged, then the roboking not be powered up even after you turn on the main power.
In this case, charge it for more than 10 minutes while the charger is powered up properly and then turn on the power.
Try this
On the rear left of the roboking, check if the main power switch is pressed.
1. On the rear left of the roboking, turn on the Power switch in red color.
2. On the rear of the roboking, press the Start/Stop button for one second until you hear the [Ding] sounds.
3. If the power is not turned on, then charging is required. So, align the roboking with the front of the charging station.
4. When the charging begins, you will hear the voice message [Charging Starts].
5. If you hear the voice message [On the rear of the roboking, the main power switch is turned off. Turn on the main power.]
repeatedly, then turn off the main power and turn it on again after about 2 to 3 seconds.
If the same problem persists, then it might be necessary to inspect the roboking.
6. If there is a foreign object on the main body and the charging port of the charging station, then use a soft cloth or cleaning brush to wipe it off.
7. Place a soft blanket on the floor and place the roboking upside down.
8. If the roboking will not be used for long(one week), then turn off the main power to save energy.
※ If the problem persists after the remedies, then you are recommended to visit the service center or request service to inspect the product.
This guide was created for all models, so the images or content may be different from your product.
