The robot cleaning function automatically cleans dusts from the filter.
The function removes dusts from the filter, which interrupt air intake, to improve efficiency of the
product.
※ The function is applicable to certain models only; No cleaning is performed on the other models even if the robot cleaning function is set on the remote control.
Try this
1. Press the set Function button with the products kept running to select the robot cleaning function.
Each pressing the button itinerates the sequences of: Auto drying → (Power saving) → Robot cleaning →
(Function of setting temperature difference upon auto switching between cooling and heating) → Cancellation
of additional function setup.
2. Press Set/Release button when Robot Cleaning message flashes to complete setting.
Select Robot Cleaning and then press Set/Release button again to release the robot cleaning function.
3. When you select the robot cleaning function by pressing Set Function button with the product kept turned off, the lamp on the display blinks green while cleaning.
4. Robot cleaning takes approximately 8 to 12 minutes depending on the product models.
Removed dusts are dumped into the dust dispenser on the side. Empty and clean the dust dispenser, if
required.
This guide was created for all models, so the images or content may be different from your product.
