Drying conditions may vary depending on the environment and/or the season.
If there is excess water left on the laundry before drying, put the load back into the washing machine for an additional spin.
This helps to increase drying performance.
Select a suitable cycle for your laundry before using the dryer.
Try this
After the drying process has finished, if the laundry is only partially dried
Spin status : Set the spin cycle to [High] and spin once more.
(The drying effect increases after a thorough spin.)
Filter Cleaning : Clean the two dust filters of the dryer before operating it.
Selecting a dry cycle suitable for the particular load of laundry : Use a dry cycle that is best suited to your laundry.
Laundry capacity : For the best results with dry and soft laundry, load the drum to only about half (3-5kg) capacity.
Laundry classification : Separate thick and thin clothing loads for optimal drying.
When drying thick and thin clothing together, the thin clothing may trigger the humidity sensor early, which leads to ending the drying process early, potentially leaving the thick clothing in a damp state.
(In such a case, set the dry level option to [High].)
After the drying process has finished, if the laundry is insufficiently dried overall
➔ Set the drying options to [Normal] [High].
The [Low] dry cycle, is for shirts to be dried to an optimal state for ironing, so the other laundry with it may not become as dry.
➔ Laundry capacity
The humidity sensor inside the dryer drum detects moisture levels depending on the amount of laundry before proceeding to dry.
If the laundry load is too small, try adding more laundry, or use it after selecting the [Warm Air] cycle.
This guide was created for all models, so the images or content may be different from your product.
