Has the [OE] (Water Outlet Error) appeared on the display while operating the dishwasher?
Your dishwasher washes your dishes by repeatedly jetting water onto the dishes inside and then emptying the water.
If all the water inside the tub is not drained, [OE] will appear on the display.
Causes and Symptoms
- The filter is covered by foreign objects.
- The drain hose is compressed or broken.
Try this
Does the water inside the dishwasher not drain effectively?
➔ Clean the filter frequently
If foreign objects remain in the filter, water may not drain effectively.
Clean the filter weekly or every two weeks and keep it clean.
Turn it clockwise until it clicks.
Wait about 30 minutes after the dishwasher has stopped completely before you remove the filter for cleaning.
Because the temperature inside the tub is high right after it stops running, if you don’t wait, you may burn your hand.
Is the drain hose compressed or broken?
➔ Straighten the drain hose to allow smooth water flow.
Close the water valve before you check the drain hose.
If you see that the drain hose is compressed or broken, straighten it to allow smooth water flow.
If the product is newly installed, contact the installation service/technician.
If this height is below 30 cm, a sewer odor may come from the sewer and water may flow back to the sink.
When the dishwasher starts, any water left in the tub will drain.
Press the Power button to start washing again.
This guide was created for all models, so the images or content may be different from your product.
