LG Sfaturi utile: [Washing Machine] No Water Inlet - Inlet Filter Cleaning | LG Romania
Skip to Contents

Sfaturi utile

Gaseste informatii de ajutor pentru produsul tau LG

Afla mai multe despre instalarea, intretinerea si depanarea produsului folosind optiunile de cautare.

[Washing Machine] No Water Inlet - Inlet Filter Cleaning

  • Altele
  • Altele
  • Depanare
  • Masini de spalat
  • Ultima actualizare 09/04/2015


No Water Inlet - Inlet Filter Cleaning



 1st : Error can occur if water pressure is low. Check water pressure.
nd : Filter in the connecting area of water supply hose eliminated precipitations in the hard water.

           When the filter is blocked, it will intervene with water supply. Close the water, disconnect the hose from

           washing machine and clean the filter before use.

How to clean filter
Close the tap and unplug the power cord.
 ② Disconnect the water supply hose by rotating counter-clockwise and remove filter.


[Separate filter using long nose plier]


[Rust on filter]


 ③ Clean the debris on filter with flowing water and brush and put back in.


[Clean with brush and assemble.]


※ Note : "IE“ error occurs when the water does not reach level within 8 minutes from the water supply started.




Feedback pentru articol

I1. In general, cat de multumit esti de utilitatea acestor informatii?
I1-1. De ce ai fost nemultumit de utilitatea acestei informatii?

Caractere ramase : 500 / 500