We use cookies, including cookies from third parties, to enhance your user experience and the effectiveness of our marketing activities. These cookies are performance, analytics and advertising cookies, please see our Privacy and Cookie policy for further information. If you agree to all of our cookies select “Accept all” or select “Cookie Settings” to see which cookies we use and choose which ones you would like to accept.
90° Corner Design Available
The content with the 90° Corner Option is shown without any interruptions even when installed on a corner.
Compatibility with
LG Software Solution
An LG service man is monitoring the status of the LED screen through the LG webOS controller and software solutions.
* The availability of the 'LG ConnectedCare' service differs by region, and it needs to be purchased separately. So please contact the LG sales representative in your region for more details.
* The items that can be monitored by LG ConnectedCare: Main Board (Temp., Signal Status, FPGA Ver, Ethernet Connection Status), Receiving Card (Temp., LED Power)
Flexible Curve LED Display
Both walls of the indoor hallway are curved, and LEDs are installed along the entire wall.
* Applied to the LSCB15-CKF, LSCB18-CKF, and LSCB25-CKF models only. The LSCB12-CKF supports curvatures of up to 1,720 mm.
Power / Signal Redundancy Support
The LSCB series is designed to support redundancy of signal and power, providing users with comfort. With an optional embedded backup power supply unit and signal redundancy, customers may experience the continuous operation of the screen without power failure, while the dual controllers can reduce screen failures with bi-directional signal input.
In the case of “LG Conventional LED Signage” even more than the error is blacked out, but in the case of “LG LSCB Series” only the error is blacked out and displayed.
* The “Conventional” shown above refers to LED displays which do not support the power/signal redundancy mode.
** The power redundancy model is optional.
*** In the case of power redundancy, additional costs can be added.
Key Feature
- Pixel Pitch: 1.25mm
- Brightness: 800cd/m²
- Ultra Slim Depth
- EMC Class B, BS 476 Part7 Class 1
All Spec
PHYSICAL PARAMETERS
Pixel Configuration
Single SMD
Pixel Pitch (mm)
1.56
Module Resolution (WxH)
192x108
Module Dimensions(WxH,mm)
300x168.75
Weight per Module (kg)
0.34
No. of Modules per Cabinet (WxH)
1x2
Cabinet Resolution (WxH)
192x216
Cabinet Dimensions (W x H x D, mm)
300x337.5x58 (Cabinet Mounting depth changs for different curve)
Cabinet Surface Area (㎡)
0.1
Weight per Cabinet (kg/unit)
2.6(weight changs for different curve)
Weight per Square Meter (kg/㎡)
25.19
Physical Pixel Density (pixels/㎡)
409,600
Flatness of Cabinet (mm)
±0.1
Cabinet material
Die-casting Aluminum
Service access
Front
OPTICAL SPECIFICATIONS
Max Brightness (After Calibration, nit)
Max. 800
Color Temperature (K)
3,200~9,300
Visual Viewing Angle (Horizontal)
160
Visual Viewing Angle (Vertical)
160
Brightness Uniformity(%)
0.97
Color Uniformity
±0.003Cx,Cy
Contrast Ratio
5,000:1
Processing Depth (bit)
14 (HDR10, HDR10 Pro)
ELECTRICAL SPECIFICATIONS
Power Consumption (W/Cabinet, Max.)
75
Power Consumption (W/Cabinet, Avg.)
25
Power Consumption (W/㎡, Max.)
740
Heat Dissipation (BTU/h/Cabinet, Max.)
256
Heat Dissipation (BTU/h/Cabinet, Avg.)
85
Heat Dissipation (BTU/h/㎡, Max.)
2,528
Power Supply (V)
100 to 240
Frame Rate (Hz)
50 / 60
Refresh Rate (Hz)
3,840
OPERATION SPECIFICATIONS
LED Lifetime (Half brightness)
100,000
Operating Temperature(℃)
-10℃ to +45℃
Operating Humidity
0~80%RH
IP rating Front
IP30
IP rating Rear
IP30
STANDARD
Certification
CE, FCC, ETL, EMC Class-B
ENVIRONMENT
Environment
RoHS, REACH
CONTROLLER
Controller
CVCA, CBCA
90 DEGREE CORNER CUT
90 degree corner cut
X
COMPLIANCE INFORMATION
- extension:pdf






















