No Water Inlet or IE error
1. If the water supply hoses are reversed (hot water supply hose to cold water inlet valve, cold water
supply hose to hot water inlet valve), water will be not supplied. The IE display error will occur when water in the tub
does not reach the appropriate level within 7~ 8 minutes.
2. Too High water inlet pressures will also cause the same error. if the supply water pressures at the tap exceed that of the
machines specified limit, the inlet valve cannot open to let water in. Turning the tap down will not resoleve the problem.
if strong water pressures are susspected, an external pressure limiting device will need to be installed at the tap. check the user manual
for water pressure limitations.
What to check
Check water supply hoses are connected to the correct water inlet valves.
Connect water supply hoses