Skip to Contents
סגור

הדרכות וידיאו

צפו בסרטון ההדרכה שלנו כדי למצוא הנחיות ועצות שימושיות כיצד להשתמש במוצר הLG שלך

צפו בסרטון ההדרכה שלנו ללמוד על התקנת מוצר, תחזוקה ופתרון בעיות.

Understanding Error Codes - Dishwasher

  • אחרים
  • אחרים
  • תפעול
  • מדיחי כלים
  • עדכון אחרון 12/03/2017
Understanding Error Codes - Dishwasher
Show Script
[Logo] LG Makes It Easy [Title]

Understanding Error Codes - Dishwasher

[Narrator]

LG makes it easy to troubleshoot your dishwasher should you run into any issues. Saving you time from calls and services.

In this video, we will help you understand and help you find a possible solution for the IE, OE and E1 error codes.

Before you begin, make sure to unplug the dishwasher unit or power down the circuit breaker.

IE

  • If you are receiving an IE Error code, your dishwasher may not be receiving adequate water.

  • Check to make sure that the water line is properly connected to the dishwasher and the water supply valve is open.

  • For proper operation, your household water pressure should be above 20 PSI.

  • Next, check the water line for any kinks or bends which can prevent the flow of water or cause very low water pressure.

OE

  • If you are receiving an OE error code, your dishwasher may not be draining properly.

  • Start by checking the drain hose for kinks or blockage, or any buildup or obstructions.

  • If you have a garbage disposal, check to see that the drain connection on the garbage disposal near the top has been knocked out.

  • This is especially important for new installations or when a new garbage disposal has been installed.

  • Upon checking that the disposal connection is clean of any obstructions, install your drain hose to the garbage disposal.

  • Make sure to create a tight seal.

E1

  • And finally, make sure that the dishwasher is not fore-drained.

  • Your LG dishwasher is equipped with a overflow protection system that can further protect your home from any possible overfill.

  • If overfilling occurs, the flow switch will trigger and E1 error code and your dishwasher will turn off to prevent outside leakage.

  • Before starting each load, check to see that the door is properly closed and the gaps is making a full seal.

  • Look for any obstruction that may hinder the door from properly closing.

  • Next, unplug and let the unit dry completely in order to reset the flow to its default setting.

  • This may take up to 48 hours.

As always, level your dishwasher properly for optimum performance.

Thank you for watching our customer support video.

We hope you enjoy your LG experience.

[Logo] LG: Life's Good [LG Audio Tone]

משוב

1. בכללי, באיזו מידה מאמר זה היה שימושי עבורך?
1.1 מדוע הכתבה לא פתרה את הבעיה שלך?

תווים משמאל 500 / 500