Would you like to know how to clean the sensor for clean use?
PM1.0 sensor can perform real time monitoring of ultra fine size dusts with the diameter of 1.0㎛ which is 1/100 of that of hair.
After the sensor detects the indoor density of dust, the display window of the stand or wall mounted air conditioner will display the results in 4 levels ranged from [Good] to [Very Bad].
If you use the air purification function when the indoor air is [Bad[ or [Very Bad], it will reduce the density of dusts in the indoor air.
If there are dusts in the PM1.0 sensor, then it cannot accurately detect the indoor air pollution, so make sure to clean it frequently.
Checking the location the PM1.0 sensor of the stand type of air conditioner
At the left bottom of the stand type of product, it says [PM1.0 SENSOR].
If you want to maintain the indoor air as fresh as possible, then clean the PM1.0 sensor located in the left bottom of the stand.
Checking the location the PM1.0 sensor of the wall mounted air conditioner
Try this
Open the cover of the PM1.0 sensor and use a wet cotton ball to wipe off the lens and then completely remove moisture.
Cleaning the PM1.0 sensor of the stand
If oily stuff and dusts are attached to the lens, then use a cotton ball soaked in alcohol(soju) to wipe it off.
Cleaning the PM1.0 sensor of the wall mounted air conditioner
If oily stuff and dusts are attached to the lens, then use a cotton ball soaked in alcohol(soju) to wipe it off.
This guide was created for all models, so the images or content may be different from your product.
