LG STD 3HP Cooling Only DUALCOOL Inverter

For clean wind and strong performance, the filter needs to be cleaned every two weeks. Wash the Pre-Filter with lukewarm water or use a neutral detergent for more stubborn dirt. After washing with water, dry the Pre-Filter in the shade away from direct sunlight. Clean an optional filter (Ultrafine dust filter, Fine Dust Filter, Allergy filter etc.) with a vacuum or a soft brush, but do not clean with water. You can use Auto Clean+1) function for more convenient air conditioning management that automatically dries the AC interior when you turn it off2). 1)Initial Auto Clean+ setup requires the ThinQ app or remote control. Check the manual included with the product for details. 2)When the product is turned off, it automatically sets an appropriate drying time based on the operating conditions. The drying time can be up to 30 minutes and may vary depending on the product. The function is set to off when shipped from the factory. The function may be change without notice. Please check the manual enclosed with the product for details.

Inverter air conditioners operate more efficiently than non-inverter air conditioners. Non-inverter air conditioners have compressors working at the same speed regardless of indoor temperature, turning off when the desired temperature is reached and turning on again when the temperature rises. Inverter air conditioners operate by adjusting the compressor speed faster at higher temperatures and slower at lower temperatures, which means they save more energy than non-inverter air conditioners and enable faster cooling and quieter operation.

You can save energy by selecting appropriate temperatures when cooling and heating and by regularly cleaning the filters to reduce unnecessary energy wastage. It is recommended to set air conditioner to 25℃ for cooling and 21℃ for heating. Additionally, using the kW Manager feature of LG air conditioners helps you use the desired amount of power. To use the kW Manager feature, a connection to ThinQ is required, and it is only available on models that support this feature. Please refer to the manual included with the product for more details.