LG Front Load Washing Machine - Installation
1. Unpack the Washer
-
Carefully remove the washer from the packaging and take out all included parts
2. Remove Transit Bolts
-
Unscrew and remove all transit bolts located on the back of the washer. These bolts secure the drum during shipping and must be removed before use to prevent damage.
3. Position the Washer
-
Place the washer on a flat, stable surface close to your water supply and electrical outlet.
4. Connect Water Supply Hoses
-
Attach the hot and cold water hoses to the corresponding taps and the washer’s water inlets.
-
Tighten the connections securely to prevent leaks. Use new hoses if possible.
5. Connect Drain Hose
-
Attach the drain hose to the washer’s drain outlet.
-
Place the other end into a standpipe, laundry tub, or suitable drain. Ensure the hose is not kinked or bent sharply.
6. Level the Washer
-
Adjust the washer’s leveling feet by turning them clockwise or counterclockwise until the washer sits firmly and level on the floor to avoid excessive vibration.
7. Plug in the Washer
-
Connect the power cord to a properly grounded electrical outlet. Avoid using extension cords.
