Let's find out more.
The All-in-One Tower has a separate charger at the top, allowing you to charge the vacuum and an extra battery at the same time.
Charge the Vacuum with the Battery Installed
→ Insert the vacuum cleaner with the battery installed into the charging station.
Make sure the locking tab is fully seated in the locking slot on the charging station. Once the vacuum is securely in place, you will hear a beep and the battery level indicator will begin blinking as charging starts.
Charging progresses in 3 stages based on the remaining charge. Once fully charged, the battery level indicator stays on.
Charge the Spare Battery
→ Open the control panel on the All-in-One Tower, insert the spare battery, and then close the panel. The spare charging indicator will blink as charging begins.
When fully charged, the indicator will stay on.
If you charge two fully discharged batteries at the same time, it takes about 8 hours to fully charge them.
This guide was created for all models, so the images or content may be different from your product.
